Manual Fiskars StaySharp Plus - 6207 (page 4 of 10) (English)

714369

Zoom out

Zoom in

1/10

Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers

Rear Wheel Assembly

1. Assemble the rear wheel bolt (A) through the rear wheel washer

(B) and insert through the rear wheel (C).

2. Screw the bolt assembly into the swing arm (D) and tighten ﬁrmly

using the 18 mm wrench or socket.

3. Repeat for the other rear wheel.

Attaching the Handle

1. Remove the two cotter pins (A) from the handle mount pegs (B).

2. Slide hole number 2 (C) of the handle onto the handle mount pegs (B).

Some force may be needed to separate the handle legs so they ﬁt over the

pegs. Release the handle until it rests on the handle stop peg (D).

3. Insert the cotter pins (A) to secure the handle.

Assembly

6 7

4. Slide handle shroud (E) into place from below with the Fiskars logo facing

down and toward the upper handle section (B).

5. Align holes in handle sections and shroud (E). Slide a handle bolt (F) through

from the inside, so that the end comes through the hole of the handle shroud.

Repeat for the remaining three handle bolts.

6. Align the hex-shaped bolt head with the hex-shaped cutout in the center

handle section (A), then hand-tighten a handle nut (G) onto the bolt. Repeat for

the remaining three handle nuts.

7. Using an 11 mm wrench or socket, tighten the four handle nuts (G) until they

are snug.

Handle Assembly

1. Lay out the handle parts upside down as shown above for easier

assembly. Note the center handle section (A) is symmetrical, so it can be

laid down on either side.

2. Make sure the arch of the upper handle section (B) is facing down. Then

insert the free ends of the upper handle section (B) into the center handle

section (A). Roughly align the holes.

3. Make sure the lower handle sections, (C) and (D), are laid out with the

notches up. Then insert the left lower handle section (marked with “L”) (C)

and the right lower handle section (marked with “R”) (D) into the center

handle section (A) as shown. Roughly align the holes.

The following parts are included in the hardware bag (bagged separately):

Handle Assembly

Handle nuts (4)

Handle bolts (4)

Rear Wheel Assembly (next page)

Rear wheels (2)

Rear wheel bolts (2)

Rear wheel washers (2)

Tools required for assembly:

The only tools required for assembly are

11 mm and 18 mm wrenches or sockets.

(left)

(right)

Handle Arch

(pointed down)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fiskars StaySharp Plus - 6207 in the language / languages: English as an attachment in your email.

The manual is 9,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fiskars StaySharp Plus - 6207

Fiskars StaySharp Plus - 6207 Quick start guide - All languages - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fiskars StaySharp Plus - 6207 Manual

Product: