714368

Fiskars StaySharp Max - 6201 Manual

4
Zoom out
Zoom in
Previous page
1/10
Next page
Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers Fiskars Help Line: 1-877-201-3260 videos & more at: skars.com/reelmowers
Assembly
Cut Height Adjustment Assembly
1. Check the front of the cutting reel for a clear, thin plastic shipping shield that extends
downward from the grass discharge chute. If the shield is present, remove and discard
it prior to first use.
2. Screw the cut height adjustment knob (G) tightly onto the exposed lever (H) by hand.
Attaching the Handle
1. Remove the two cotter pins (I) from the handle-mount pegs (J).
2. Slide hole number 3 (K) of the handle onto the handle-mount pegs (J)
and then release the handle until it rests on the handle-stop peg (L).
3. Insert the cotter pins (I) to secure the handle into place.
Assembly
G
H
K
L
Attaches
to inside of
frame
Attaches
to outside of
frame
I
J
J
I
L
K
K
J
I
6 7
A
B
C
D
E
F
G
6. Align holes in handle sections and shroud (D). Slide a handle bolt (E)
through from the inside, so that the end comes through the hole of the handle
shroud. Repeat for the remaining three handle bolts.
7. Align the hex-shaped bolt head with the hex-shaped cutout in the center
handle section (A) and then hand tighten a handle nut (F) onto the bolt.
Repeat for the remaining three handle nuts.
8. Using a wrench, tighten the four handle nuts (F) until they are snug.
Handle Assembly
1. The only tool required for assembly is a 11 mm wrench or socket.
2. Lay out the handle parts as shown above. Note the center handle section
(A) is symmetrical.
3. Insert the free ends of the upper handle section (B) into the center handle
section (A), making sure the arch of the upper handle section is down.
Roughly align the holes.
4. Insert the two lower handle sections (C) into the center handle section (A),
making sure the pointed ends of the lower handle sections are up as shown.
Roughly align the holes.
5. Slide handle shroud (D) into place from below with the Fiskars logo facing
down and toward the upper handle section (B).
The following parts are
included in the hardware bag:
Handle nuts (4)
Handle bolts (4)
Cut height adjustment knob (1)
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fiskars StaySharp Max - 6201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fiskars StaySharp Max - 6201 in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info