Manual First Degree VORTEX VX-3 FLUID ROWER (page 30 of 32) (English)

671443

Zoom out

Zoom in

1/32

Bungee Cord Replacement. Dealer Assistance Required

(Expect 2-5 years bungee life in commercial use. Damage during initial rower

assembly is not covered under warranty)

1. Unhook Bungee Cord Hook. Remove

computer mount with 6mm Allen key.

2. Carefully peel back and remove the

Belt Pulley Sticker. Then remove

C-Clip and Black Spacer as shown.

Pulley Sticker

Spacer

C-Clip

Spacer

3. Remove the Belt Pulley and the Spacer.

Unhook the Bungee Cord End from the

Pulley and remove by pulling out from

the bottom.

Ear Strap

4. Feed the new Bungee Cord from

below and reattach end strap to the

Belt Pulley.

5. Attach the Spacer to the end of the

rower pulley and use the “ear” to help

thread the strap into the machine.

Note that the Spacer may require

being tilted just slightly to allow it to

pass through.

Tilt Spacer

slightly

6. Reattach the Bungee Hook to the end

of the Seat Rail, install outer Spacer,

C-Clip and Sticker. Test for proper

installation. If the C-Clip cannot be

reinstalled, then remove Pulley and

try again as the Strap may be

jammed.

Note: A light tap may be required if the black inner Spacer will not pass inside the frame.

A tight C-Clip mounting indicates the process should be repeated as the belt is jammed up.

Ear

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of First Degree VORTEX VX-3 FLUID ROWER in the language / languages: English as an attachment in your email.

The manual is 7,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

First Degree VORTEX VX-3 FLUID ROWER Manual

Product: