795159
53
Zoom out
Zoom in
Previous page
1/56
Next page
Page 53
APPENDIX
FAQ’s
If your problem is not listed below, please call our toll-free
number for more support. Tech Services: 800-323-9005.
Question: Why does DVR not work after
starting? Why did the DVR stop working?
Answer:
Check that the power adapter is
plugged into the DVR properly
Check the power source and all power cord
connections are properly connected
Make sure the power on-off switch on
the back of the DVR unit is on
Question: Why does the DVR reboot automatically?
Or stop for several minutes after starting?
Answer:
Check the supply voltage to be sure it is stable
Bad track on hard drive or the hard drive is bad
Instability of the front-end video signal
High temperature, too much dust, bad
DVR operating environment
Question: Why is there no video output
on single, multi or all channels?
Answer:
Check if the camera adaptor is properly connected
Check the cable for connecting video input/
output in the back panel of DVR
Insert the video source directly into the display
device and check if they are causing the problem.
Check the brightness of the picture and bring
it back to its original default setting
No video input signal or too weak
Question: What is the meaning of?
Answer:
Question: Why does DVR have problems
with real-time images, such as bad image
color or serious brightness distortion?
Answer:
If PAL and NTSC are not correctly selected, the images
will be in black and white and possibly a rolling screen.
DVR is not compatible with monitor
The video transmission distance (cable run) is too long
Adjust the DVR color settings
Question: Why is there no audio sound when monitoring?
Answer:
Check sound box or speaker functions.
Also check possible short circuit.
Audio source may be connected to the video
channel. You can click to full-screen to check.
The hardware of DVR is defective
Cameras are not audio capable
Speakers need to have an amplifier
Channel being monitored is not
connected to an audio camera
Volume regulate is turned down
Question: Why is there no audio when playing back?
Answer:
Check to see that the audio settings
for the channels are correct.
Audio is off in record menu
Question: Why is my system time not correct?
Answer:
Wrong setting or user did not click OK to confirm
Question: Why doesn’t motion detection work?
Answer:
The setting of motion detection area is not correct
Sensitivity is too low
Question: Why do I have no disc or disc mount error?
Answer:
The data being downloaded exceeds
the capacity of backup device
The backup device is incompatible
The backup device is damaged
Question: Why doesn’t the Remote Control work?
Answer:
The remote control is too far from the DVR
Remote control batteries are dead or low
Remote control is damaged, check by
using the control on the DVR
Question: Why can’t I log in over the Internet?
Answer:
Check the network to see if it is connected.
Check if LINK or 100M LED is displayed normally
on the panel; use ping xxx.xxx.xxx.xxx (DVR IP)
to check if the Internet is linked properly.
Make sure you are running Windows 7, Vista or XP
operating system and Internet Explorer 6.0 - 8.0
Indicates the channel is recording.
Channel is capable of providing audio.
Motion detected.
Indicates motion record enabled.
Indicates a remote log in session is in prog-
ress.
FAQ,s
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for First Alert DVRAD0805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of First Alert DVRAD0805 in the language / languages: English as an attachment in your email.

The manual is 4.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info