500539
4
Zoom out
Zoom in
Previous page
1/7
Next page
E-7
OPERATION OF RADIO
- PRESS THE "ON/STANDBY" KEY ONCE TO SWITCH ON THE UNIT.
- PRESS THE KEY REPEATEDLY UNTIL THE DISPLAY SHOWS THE RADIO
FREQUENCY.
- TO IMPROVE FM-RADIO RECEPTION, FULLY EXTEND THE FM-ANTENNA WIRE
AND ADJUST IT'S POSITION.
- USE THE FM MODE KEY TO SELECT THE DESIRED MODE ( .
IN SOME CASES, WHERE RECEPTION IS POOR, IT MAY BE ADVISABLE TO SELECT
“MONO” MODE, TO IMPROVE CLARITY OF THE RADIO SIGNAL.
FM MONO/STEREO)
MANUAL FREQUENCY ADJUSTMENT (SCAN MODE)
- PRESS (AND IMMEDIATELY RELEASE) THE
TO "SCAN" (MANUALLY ADJUST) THE RADIO FREQUENCY "UP" OR "DOWN"
BY 1-STEP AT A TIME.
- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY AT EACH
STEP’S POSITION.
- WHEN A DESIRED FREQUENCY OR STATION IS REACHED. IT CAN BE SAVED
INTO ONE OF THE "MEMORY" POSITIONS. (SEE "RADIO MEMORY" SECTION).
TUNE UP OR TUNE DOWN
KEYS
AUTOMATIC FREQUENCY ADJUSTMENT (SEEK MODE)
- PRESS AND HOLD (FOR 2 SECONDS) THE
KEYS TO "SEEK" (AUTOMATICALLY ADJUST) THE RADIO FREQUENCY "UP" OR
"DOWN" TO THE NEXT AVAILABLE RADIO STATION.
- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY OF THE
NEXT STATION THAT IS FOUND.
- WHEN A DESIRED STATION IS REACHED. IT CAN BE SAVED INTO ONE OF THE
"MEMORY" POSITIONS. (SEE "RADIO MEMORY" SECTION).
TUNE UP OR TUNE DOWN
FUNCTION
RADIO MEMORY (STATION PRESET MEMORY STORAGE)
- AT ANY TIME, THE CURRENTLY DISPLAYED STATION OR FREQUENCY CAN BE
STORED INTO ONE OF THE MEMORY POSITION.
- PRESS KEY ONCE.
- PRESS THE OR KEY TO SELECT THE DESIRED MEMORY POSITION
TO SAVE THE RADIO STATION.
-
- TO CLEAR THE MEMORY OF ANY POSITION, SIMPLY SAVE A NEW STATION TO
THE SAME MEMORY POSITION.
(ON REMOTE CONTROL)
- PRESS KEY ONCE TO SAVE THE SELECTED STATION INTO THE
SELECTED MEMORY POSITION.
TO RECALL A STATION IN MEMORY, PRESS & HOLD FOR 3 SECONDS,
PRESS OR KEY TO SELECT DESIRED MEMORY STATION. (THERE
ARE 30 MEMORY POSITIONS FOR FM BAND). THEN PRESS THE FUNCTION KEY
AGAIN TO HAVE THE KEYS CONTROL THE VOLUME OF THE UNIT ONCE AGAIN.
MEM/ PROG.
ELECTRONIC VOLUME CONTROL
- THIS UNIT USES AN ELECTRONIC VOLUME CONTROL .
- TO INCREASE OR DECREASE THE LOUDNESS OF UNIT, PRESS
THE VOLUME UP (VOL +) OR VOLUME DOWN (VOL -) KEYS RESPECTIVELY.
- RELEASE THE KEY WHEN VOLUME LEVEL IS AT THE DESIRED LOUDNESS.
- SOMETIMES, ESPECIALLY DURING LISTENING TO THE RADIO, YOU MAY NOTICE
A "CLICK-CLICK-CLICK" (REPEATING) SOUND WHEN YOU ARE INCREASING OR
DECREASING THE VOLUME. THIS IS A NORMAL CONDITION & THE SOUND WILL
DISAPPEAR WHEN YOU RELEASE THE VOLUME KEY (WHEN YOU REACH THE
DESIRED VOLUME LEVEL).
(PUSH BUTTON TYPE)
- TURN ON BOTH THE UNIT AND THE iPod/ iPhone .
- PRESS THE KEY REPEATEDLY UNTIL THE DISPLAY SHOWS iPod .
- THE UNIT WILL AUTOMATICALLY START PLAYBACK OF THE SONGS.
- THE iPod DISPLAY WILL INDICATE THE INFORMATION OF THE CURRENT
SONG (TRACK).
/ iPhone
/iPad
""
/iPad
- AT ANYTIME DURING PLAYBACK, PRESS THE PLAY/ PAUSE KEY
TO PAUSE OPERATION OF THE UNIT. PRESS PLAY/ PAUSE KEY TO RESUME
OPERATION AT THE SAME TRACK & POSITION.
- AT ANYTIME DURING PLAYBACK, PRESS & HOLD THE PLAY/ PAUSE KEY
TO STOP PLAYBACK OF UNIT.
- AT ANYTIME DURING PLAYBACK, PRESS AND RELEASE THE
KEYS TO SKIP FORWARD OR BACKWARDS BY ONE TRACK,
AS DESIRED.
TUNE UP OR
TUNE DOWN
- ANY ANYTIME DURING PLAYBACK, PRESS AND HOLD THE
KEYS ON UNIT TO FAST-FORWARD (CUE) OR FAST-REVERSE
(REVIEW) THE SPECIFIC TRACK, WHICH IS CURRENTLY PLAYING.
TUNE UP OR
TUNE DOWN
/iPad
/iPad
/iPad
/iPad
/iPad
PLAY/ PAUSE
/iPad
- YOU CAN OPERATE THE iPod USING EITHER THE SET, REMOTE CONTROL
OR DIRECTLY WITH THE iPod ITSELF.
- WHEN THE iPod HAS BEEN CONNECTED WITH THE UNIT, IT WILL START
CHARGING THE BATTERY OF THE iPod .
/ iPhone
/ iPhone
/ iPhone
/ iPhone
- NEVER REMOVE (OR UNPLUG) THE iPod/ iPhone FROM THE SET DURING
PLAYBACK, ALWAYS PRESS & HOLD FOR 2 SECONDS THE KEY
FIRST AND THEN PRESS THE KEY TO SWITCH TO ANOTHER SOURCE
(EG. "RADIO" OR "AUX") BEFORE REMOVING OR UNPLUGGING THE iPod/ iPhone ,
TO PREVENT DAMAGE TO YOUR SONG FILES OR MEMORY DEVICES.
REPEAT PLAYBACK FUNCTION (iPod/ iPhone/ iPad)
- AT ANYTIME DURING iPod/ iPhone/ iPad PLAYBACK:
- PRESS THE KEY ON REMOTE CONTROL OR
PRESS THE FOLLOWING SYMBOLS ON THE iPod/ iPhone SCREEN:
= TO REPEAT THE CURRENT TRACK
/iPad
= TO REPEAT ALL TRACKS
“Made for iPod,” “Made for iPhone,” and “ mean that an electronic accessory has
been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified
by the developer to meet Apple performance standards. Apple is not responsible for the operation
of this device or its compliance with safety and regulatory standards.
Made for iPad,”
Please note that the use
of this accessory with iPod, iPhone, or iPad may affect wireless performance.
E-8
FUNCTION
FUNCTION
REPEAT
OPERATION WITH THE iPod/ iPhone/ iPad
THIS UNIT IS DESIGNED TO ALLOW YOU TO CONNECT AN WITHOUT THE
NEED FOR DOCK CONNECTORS. THE DESIGN OF THE UNIT HAS BEEN STRUCTURED
TO PROVIDE SUPPORT TO TE CONNECTOR UNDER NORMAL USAGE WITHOUT EXCESSIVE
PRESSURE ON THE WHEN CONTROLLING PLAYBACK USING
THE SCREEN.
iPod/ iPhone/ iPad
iPod/ iPhone
iPod/ iPhone
/iPad
/iPad
FUNCTION
MEM +
MEM -
MEM/ PROG.
MEM +
MEM -
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finlux Z-255 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finlux Z-255 in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info