7980
2
Zoom out
Zoom in
Previous page
1/3
Next page
11
13
3. Select desired waveband by sliding the switch >CD /
/ MW / FM< and ensure that a station is tuned in.
4. Set the >VOLUME< to the desired level.
5. Press >ON/OFF< to switch off the clock radio. >ON Indicator< switches off.
6. The radio alarm will sound every day at the preset time When the radio alarm
for 90 minutes. sounds, >ON Indicator<
lights.
7. To switch off the alarm until the next day press >ON Indicator< switches off.
>ON/OFF<.
8. To switch off the alarms permanently set the Corresponding >ALARM
>ALARM 1< or >ALARM 2< to >OFF< position. Indicator< switches off.
SETTING ALARMS TO WAKE TO CD
Action Display
1. Set the alarm time as previously described. Set the
alarm mode to >MUSIC< position.
2. Set >ALARM 1< or >ALARM 2< to >ON< position. Corresponding >ALARM
Indicator< lights.
3. Slide the switch >CD / MW / FM< to >CD< position
and insert a CD.
4. Set the >VOLUME< to the desired level.
5. Press >ON/OFF< to switch off the clock radio. >ON Indicator< switches off.
Important: failure to switch off the unit will result in non
operation of the CD at alarm time.
6. The CD will play every day at the preset time for When the CD plays, >ON
90 minutes. Indicator< and >REPEAT
Indicator< lights.
7. To switch off the alarm until the next day press >ON Indicator< and >REPEAT
>ON/OFF<. Indicator< switches off.
8. To switch off the alarms permanently set the Corresponding >ALARM
>ALARM 1< or >ALARM 2< to >OFF< position. Indicator< switches off.
SETTING ALARMS TO WAKE TO CD PROGRAMME
Action Display
1. Set the alarm time as previously described. Set the
alarm mode to >MUSIC< position.
2. Set >ALARM 1< or >ALARM 2< to >ON< position. Corresponding >ALARM
Indicator< lights.
3. Slide the switch >CD / MW / FM< to >CD<
position and insert a CD.
4. Set the >VOLUME< to the desired level.
5. Programme the favourite tracks as described earlier.
6. Press >PLAY/PAUSE< followed by >STOP<.
7. Press >ON/OFF< to switch off the clock radio.
Important: failure to switch off the unit will result in non >ON Indicator< switches off.
operation of the CD at alarm time.
8. The CD will play every day at the preset time for 90 When the CD plays, >ON
minutes. Indicator< and >REPEAT
Indicator< lights.
9. To switch off the alarm until the next day press >ON Indicator< and >REPEAT
>ON/OFF<. Indicator< switches off.
10. To switch off the alarms permanently set the >Alarm 1< Corresponding >ALARM
or >ALARM 2< to >OFF< position. Indicator< switches off.
SNOOZE CONTROL
Action Display
1. The buzzer, CD or radio alarm can be silenced for 6 >ON Indicator< switches off.
minutes by press >SNOOZE<. This sequence can be Corresponding >ALARM
repeated during the 90 minute alarm period. Indicator< and clock time
lights
SLEEP TIMER
Action Display
1. CD or radio playback can be set to switch off
automatically after a preset time has elapsed.
2. Repeatedly press and release >SLEEP< until the >SLEEP Indicator< flashes
desired time is reached (maximum 90 minutes in 30 and sleep time, e.g. >30<,
minutes step). >60< or >90< lights for a
while to resume to clock time.
3. The radio will play after a few seconds if selected >SLEEP Indicator< lights.
4. If CD has been selected press >PLAY/PAUSE< and >SLEEP Indicator< lights.
CD will play for the time selected sleep time.
5. The CD or radio will switch off after the sleep time has >SLEEP Indicator< and >ON
elapsed. Indicator< switches off.
6. To cancel the sleep function before the preset time >SLEEP Indicator< and >ON
has expired, press >ON/OFF<. Indicator< switches off.
7. To check remaining sleep time, press >SLEEP< once. Remaining sleep time, e.g.
>27< appears for a while and
resume to clock time.
8. To amend time after sleep time is being set, press again >SLEEP Indicator<
>SLEEP< by steps until the desired sleep time is flashes. Sleep time, e.g. >30<
reached. lights for a while and resume
to clock time.
AUTO DIMMER
1. The Auto Dimmer located on the left side of the LED display automatically adjusts the
intensity of the clock display to suit room brightness.
HEADPHONES
1. A Headphone Socket (3.5mm) located on the left side is provided for use with either
headphones or an earpiece. Inserting a plug automatically mutes the internal
loudspeaker.
TECHNICAL SPECIFICATIONS
POWER SUPPLY Operating Voltage AC 230V
Mains Frequency 50 Hz
Battery 1 x 9V (Type IEC 6LR61 / 6F22 / PP3 or
equivalent)
Frequency Coverage FM 88 108 MHz
MW 525 – 1605 kHz
CIRCUIT FEATURES Loudspeaker Size (L&R) 77mm
Impedance 8 ohms
Output Power 0.8W
Headphone Socket Ø3.5mm
Aerial System FM String Wire Aerial
MW Built-in Ferrite Bar Aerial
GENERAL Dimensions of Unit 145L x 133H x 171D (mm) Approx.
Net Weight 1.4 kgs Approx.
Packing 1 Set Per Gift Box
Accessories User Manual
CR-20CD
MANUEL D’UTILISATION
Lisez attentivement ce manuel d’utilisation avant d’utiliser l’appareil. Gardez
ce manuel pour référence ultérieure.
RADIO REVEIL CD AVEC DOUBLE
ALARME
12
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finlux CR-20CD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finlux CR-20CD in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info