574920
30
Zoom out
Zoom in
Previous page
1/99
Next page
30
7.1 Conmutar dirección de giro [1-3]
Interruptor de derecha a izquierda
= giro a la derecha;
Interruptor de izquierda a derecha
= giro a la izquierda;
8 Sujeción del alojamiento para he-
rramienta
8.1 Sujetador de bits
El sujetador de bits sirve para el cambio rápido
de las puntas de destornillador.
ATENCIÓN
¡La herramienta puede causar cortes durante
el cambio!
¡Utilice guantes de protección!
Insertar el sujetador de bits
Coloque el interruptor [1-4] en la posición
MAN.
Ponga el sujetador de bits [4-2] en el tope de
la apertura seisavada del husillo de taladrar
[4-4].
Afi rme el bit en el sujetador de bits [4-3].
Después ponga el tope de profundidad sobre
la caja de engranajes como se describe en el
punto 9.2.
Extraer el sujetador de bits
Extraiga el tope de profundidad según la des-
cripción en el punto 9.2.
Saque por fuerza el sujetador de la apertura
del husillo de taladrar.
Cambio de bits
Para el cambio de bits [1-6] se puede utilizar el
tope de profundidad [1-5].
Coloque el tope de profundidad sobre el bit (ver
imagen [4 b] ).
Atorando el tope de profundidad con el bit y a
la vez avanzando es posible sacar el bit.
Después coloque en el sujetador un bit nuevo.
9 Puesta en marcha
9.1 Encender y apagar el equipo
La máquina sólo apretando el interruptor [1-2]
no se va a poner en marcha – ¡No es defecto
de la máquina!
¡La máquina después de atornillar la longitud
requerida se apagará sola!
El equipo se puede encender de diferentes mo-
dos:
a)
Ajuste por medio del interruptor [1-3] el giro
derecho de la máquina.
Ajuste el interruptor [1-4] en la posición MAN.
Para encender la máquina apriete el interrup-
tor [1-2] y conjuntamente apriete el bit sobre
tornillo.
Por medio del interruptor [1-2] se pueden regular
continuamente los giros.
b)
Ajuste por medio del interruptor [1-3] el giro
derecho de la máquina.
Coloque el interruptor [1-4] en la posición AU-
TO.
La máquina se pondrá en marcha apretando el
bit sobre el tornillo.
No es necesario prender el interruptor [1-2]. El
giro máximo está regulado automáticamente.
c)
Ajuste por medio del interruptor [1-3] el giro
izquierdo de la máquina.
Para encender la máquina apriete el interrup-
tor [1-2]. El interruptor MAN/AUTO [1-4] es
en posición libre.
Por medio del interruptor [1-2] se pueden re-
gular continuamente los giros.
¡En caso de ajustar por medio del interruptor
[1-3] el giro izquierdo, el taladro atornillador
se puede poner en marcha solo apretando el
interruptor – sin presión adicional sobre el bit!
¡Pues para destornillar los tornillos no es ne-
cesario desmontar el tope de profundidad!
9.2 El tope de profundidad
Girando el tope de profundidad se puede ajustar
la profundidad de atornillado – ver imagen [5]. La
exactitud de reglaje es quizá ± 0,1 mm.
El giro izquierdo = el tornillo se encalva más
profundo.
El giro derecho = el tornillo se encalva me-
nos profundo.
Después de ajustar la profundidad ponga un tor-
nillo para probar y ajuste bien la profundidad.
Montaje del tope de profundidad
Coloque el tope de profundidad [4-1] sobre la
caja de engranajes [4-5], hasta apreciar por el
oído el encaje.
Desmontaje del tope de profundidad
Saque por fuerza el tope de profundidad de la
caja de engranajes.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DWC 18-4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DWC 18-4500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info