Manual Festool DWC 18-2500 (page 18 of 99) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

574919

Zoom out

Zoom in

1/99

peep peep

- Machine is overheating

• You must allow the machine

to cool before using again.

peep peep peep

- LiIon battery pack is faulty

or has overheated.

• Once the battery pack has

cooled, perform a functional

check using the charger.

11 Service and mainte nance

WARNING

Risk of accident, electric shock

 Always disconnect the battery pack from the

machine before any maintenance or care

work.

 All maintenance and repair work which re-

quires the motor housing to be opened, must

only be carried out by an authorised service

workshop.

Customer service and repair only through

manufacturer or service workshops:

Please ﬁ nd the nearest address at:

www.festool.com/Service

EKAT

Use only original Festool spare parts!

Order No. at: www.festool.com/Service

Note the following information:

– Keep the ventilation slits on the machine free

and clean to ensure adequate cooling.

– Keep the contacts on the machine, charger and

battery pack clean.

Information on battery packs

– Store in a cool, dry place at a temperature be-

tween 5 °C and 25 °C.

– Protect battery packs from moisture, water and

heat.

– Do not leave ﬂ at battery packs in a charger

disconnected from the mains power supply for

longer than one month. Danger of deep dis-

charge!

– If you intend to store li-ion battery packs for

longer periods without use, you should charge

them to 40 % capacity (approx. 15 min charging

time).

– To avoid short circuits the battery pack should

be stored in the packaging supplied.

– Signiﬁ cantly shorter operating times after each

charge indicate that the battery pack is worn

and should be replaced with a new one.

12 Transport

A li-ion battery pack alone falls below the appli-

cable limit value and certiﬁ ed as per UN manual

ST/ SG/ AC.10/11/rev. 3 part III, subsection 38.3.

However, dangerous goods regulations may apply

when several battery packs are transported.

13 Environment

Do not throw the power tool in your household

waste! Dispose of the machine, accessories and

packaging at an environmentally-responsible re-

cycling centre! Observe the valid national regula-

tions.

EU only: European Directive 2002/96/EC stipulate

that used electric power tools must be collected

separately and disposed of at an environmentally

responsible recycling centre.

Return used or faulty battery packs to your local

specialist retailer, Festool after-sales service or

a designated public waste management facility.

The battery packs will then be recycled. (Observe

the regulations applicable in your country). The

batteries must be discharged on return.

EU only: European Directive 91/157/EEC stipu-

lates that faulty or used battery packs/batteries

must be recycled.

Information on REACh:

www.festool.com/reach

14 EU Declaration of Conformity

Cordless drywall screwdriver Serial no.

DWC 18-2500 767850

DWC 18-4500 767898

Year of CE mark: 2013

We declare under sole responsibility that this

product comply with all relevant requirements

of the following directives, norms or normative

documents:

2006/42/EC, 2004/108/EC, 2011/65/EU, EN 55014-

1, EN 55 014-2, EN 60745-1, EN 60745-2-2, EN

61000-3-2, EN 61 000-3-3.

Charger Serien-Nr.

TCL 3 10002345, 10004911

Year of CE mark: 2013

We declare under sole responsibility that this

product comply with all relevant requirements

of the following directives, norms or normative

documents:

2004/108/EC, 2006/95/EC, 2011/65/EU, EN 60335-

1, EN 60335-2-29, EN 61000-3-2, EN 61000-3-3,

EN 61204-3.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool DWC 18-2500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool DWC 18-2500 Manual

Product: