Manual Festool CTM B22 (page 18 of 110) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

499178

Zoom out

Zoom in

1/110

CTM 48 E LE EC/B22, CTL 48 E LE EC/B22

Damaged safety devices and components

must be repaired or replaced in a recognised

specialist workshop, unless otherwise indi-

cated in the operating manual.

Observe the following instructions:

– A dust test must be performed at least

once a year by the manufacturer or an in-

structed person. This test may include

checks to determine whether the filter is

damaged, the machine is sealed properly

and the monitoring features are function-

ing correctly.

– During maintenance and repair work, all

components that cannot be cleaned satis-

factorily must be replaced. The old compo-

nents must be sealed in impermeable

plastic bags prior to disposal in compliance

with applicable regulations for this type of

waste.

– Provided maintenance personnel or other

persons in the vicinity are not endangered,

the user must dismantle and clean the ma-

chine prior to performing maintenance

work. Appropriate precautionary measures

include decontaminating the machine prior

to disassembly, making provisions for lo-

cally filtered forced ventilation at the loca-

tion of machine disassembly, cleaning the

maintenance area and appropriate person-

al protective equipment.

9.1 Changing the filter element

Open the locking clips [2-2] and remove

the top section of the machine[2-1].

Turn the top section of the machine so

that the main filter is facing upwards

(Fig.[7]).

Fold over the lever [7-3] and remove the

retainer. [7-2]

Remove the used main filter and replace

[7-1] with a new one.

Dispose of the used filter in accordance

with statutory regulations.

Insert the retainer [7-2] and fold over the

lever [7-3] until it engages.

Replace the top section [2-1] and close

the locking clips [2-2].

9.2 Changing the cooling air filter

[8]

Replace the cooling air filter if the mobile

dust extractor switches off due to excess

temperature and replace at least once a year.

We recommend that you always replace

the cooling air filter together with the

main filter.

Unscrew the cooling air cover [8-1].

Remove the cooling air filter and replace

with a new one!

Close the cooling air cover.

9.3 Emptying the dust container

The dust container [2-3] can be emptied

once the top section has been removed.

After extracting fluids, clean the fill level

sensors [9-1] regularly with a soft cloth

and inspect for damage.

10 Accessories

Use only original Festool accessories and

Festool consumable material intended for

this machine because these components are

designed specifically for the machine. Using

accessories and consumable material from

other suppliers will most likely affect the

quality of your working results and limit any

warranty claims. Machine wear or your own

personal workload may increase depending

on the application. Protect yourself and your

machine, and preserve your warranty claims

by always using original Festool accessories

and Festool consumable material!

The order numbers for the accessories and

filters can be found in the Festool catalogue

or on the Internet at "www.festool.com".

NOTE

Motor damage

Never operate the extractor without a fil-

ter element fitted as the motor may be-

come damaged.

WARNING

Using non-approved accessories and

spare parts

Risk of explosion

Always use Festool approved accessories

and spare parts in Design 22 mobile dust

extractors - See accompanying spare

parts and accessories list.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTM B22 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool CTM B22 Manual

Product: