574914
7
Zoom out
Zoom in
Previous page
1/18
Next page
7
5.3.2 Changing tools
- Pull the unlocking ring (2.4) back and remove
the tool and/or insert the new tool.
5.4 Tool holding fixture in the drill spindle
Bits can be fitted directly in the hexagon socket
holder of the drill spindle (2.11) to make the
machine lighter and shorter.
6 Accessories, tools
The accessory and tool order number can be
found in the Festool catalogue or on the Internet
under "www.festool.com".
Bit depot
Attachments which are used on a regular basis,
as for example the chuck key (4.2), bit extender
(4.3) or different bits (4.5), can be clipped onto
the bit depot (4.1).
The bit depot can be snapped into the bottom
of the drill/screwdriver with its mounting lugs
(4.6). When the mounting lugs are inserted into
the corresponding holes (4.4) and the magazine
is slid sideways the contour of the case aligns
with the contour of the magazine.
The spring loaded catch of the bit magazine can
loosen on impact of drill/screwdriver.
7 lnstructions on application -
maintenance - care
Please pay attention to the following
instructions. Otherwise there is a risk of damage
to the tool, charger or battery pack.
Keep the air vents of the electronic equipment
and the charger clean to guarantee the air
circulation for cooling.
Keep the connection contacts of electronic
equipment, charger and battery pack clean.
Festool chargers and Festool battery packs
are designed for each other. Therefore, only
use Festool chargers to charge Festool battery
packs.
By keeping the battery pack in a ready for use
charger, the battery pack will be kept in a state
of readiness by float charging conservation.
Do not keep discharged battery pack
(maximum one month) attached to charger
whenever charger is detached from the power
supply (danger of deep discharging).
A new battery pack or a battery pack not used
for a longer period of time reaches it's full
capacity after about 5 charging and discharging
cycles.
Battery packs should, before charging, be fully
discharged if possible. Continuous starting of
the charging process shortens the lifespan of
the batteries.
A considerably reduced time of operation per
charging shows that the battery pack is used
up an should be replaced by a new one.
Store battery packs at ambient temperatures
between 0°C and 35°C.
All maintenance and repair work, requiring
dismantling of equipment, may only be
performed by an authorised after-sales service
workshop.
8 Recycling battery packs
Never throw spent battery packs into
domestic waste containers! Return spent or
defective battery packs to dealers, the Festool
after-sales service department or approved waste
disposal facilities. This ensures that they are
correctly recycled.
9 Warranty
Festool warrants, that all Festool portable power
tools will be free from defects in materials and
workmanship for a term of one year from the date
of procurement. Festool makes no other warranty,
express or implied, for all Festool portable power
tools. No agent, representative, distributor, dealer,
or employee of Festool has the authority to
increase or otherwise change the obligations or
limitations of this warranty. The obligations of
Festool in its sole discretion under this warranty
shall be limited to the repair or replacement of
any Festool portable power tool which is found to
be defective as packaged with this User Manual.
Excluded from the coverage under this warranty
are: normal wear and tear; damages caused by
misuse, abuse or neglect; damage caused by
anything other than defects in material and
workmanship.
Returning product: Call us for authorisation.
For product returns: (888) 463-3786
For service or repairs: (800) 554-8741
We will supply you with the correct address for
your return. This is important because not all types
of returns are to be shipped to the same address.
IN NO EVENT SHALL FESTOOL BE LIABLE FOR
ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESSED OR IMPLIED WHATSOEVER.
ALL WARRANTIES IMPLIED BY STATE LAW,
INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE DURATION OF ONE YEAR.
Some states in the U.S. and some Canadian
provinces do not allow the limitations on how long
an implied warranty lasts, so the above limitation
may not apply to you. With the exception of any
warranties implied by state or province law as
hereby limited, the foregoing express limited
warranty is exclusive and in lieu of all other
warranties, guarantees, agreements and similar
obligations of Festool.
This warranty gives you specific legal rights and
you may also have other rights which vary from
state to state in the U.S. and province to province
in Canada.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CDD FX 12.0 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CDD FX 12.0 V in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info