574909
4
Zoom out
Zoom in
Previous page
1/78
Next page
4
Technische Daten
Bohrschrauber CDD 9.6 CDD 12
Motorspannung 9,6 V 12 V
Leerlaufdrehzahl  1. Gang 0 - 380 min
-1
0 - 380 min
-1
 2. Gang 0 - 1100 min
-1
0 - 1100 min
-1
Drehmoment max.
 weicher Schraubfall (Holz) 10 Nm 18 Nm
harter Schraubfall (Metall) 26 Nm 30 Nm
Drehmoment einstellbar 0,5 - 5 Nm 1 - 7 Nm
Bohrfutter-Spannbereich 1 - 10 mm 1,5 - 13 mm
max. Bohrdurchmesser in Metall 12 mm 14 mm
max. Bohrdurchmesser in Holz 20 mm 25 mm
Werkzeugaufnahme in Bohrspindel 1/4" 1/4"
Gewicht mit Akku 1,8 kg 2,0 kg
Ladegerät MCU 15 EC 60 ECU 45
Netzspannung (Eingang) 220 - 240 V~ 230 - 240 V~ 230 - 240 V~
Netzfrequenz 50/60 Hz 50 Hz 50/60 Hz
Ladespannung (Ausgang) 4,8 - 14,4 V (DC) 7,2 - 14,4 V (DC) 7,2 - 14,4 V (DC)
Ladestrom
Schnellladung max. 7,5 A 1,5 A max. 3 A
Erhaltungsladung pulsierend ca. 0,06 A 0,03 A 0,06 A
Ladezeit für NiCd 1,2 Ah ca. 11 min - -
NiCd 1,4 Ah ca. 13 min ca. 70 min ca. 38 min
NiCd 1,7 Ah ca. 16 min ca. 85 min ca. 42 min
NiCd 2,0 Ah ca. 20 min ca. 95 min ca. 46 min
NiMH 3,0 Ah ca. 70 min - ca. 70 min
Gewicht 0,9 kg 1,4 kg 0,5 kg
Akkupack BPH 9.6 C BPH 12 C BP 12 C 3.0 MH
Bestellnummer 488 437 488 438 489 728
Spannung 9,6 V 12 V 12 V
Zellen 8 x 1,2 V, NiCd 10 x 1,2 V, NiCd 10 x 1,2 V, NiMH
Kapazität 2,0 Ah 2,0 Ah 3,0 Ah
Ladetemperaturbereich 5 - 45 °C 5 - 45 °C 5 - 45 °C
Ladezustandsüberwachung m i t t e l s N T C - W i d e r s t a n d
Gewicht 0,5 kg 0,6 kg 0,6 kg
Die angegebenen Abbildungen befinden sich am Anfang dieser Bedienungsanleitung.
1 Bestimmungsgemäße Verwendung
Die Akku-Bohrschrauber sind zum Bohren in
Metall, Holz, Kunststoffen und ähnlichen Ma-
terialien geeignet, sowie zum Festschrauben
und Einschrauben von Schrauben bis Durch-
messer 6 mm.
Die Ladegeräte MCU 15, EC 60 und ECU 45
sind bestimmungsgemäß zum Aufladen der
unter 2.2 angegebenen Akkupacks zu verwen-
den.
Für Schäden durch nicht bestimmungsgemä-
ßen Gebrauch haftet der Benutzer.
Für Ihre Sicherheit
Beiliegende Sicherheitshinweise beachten.
Geräte vor Nässe schützen.
Schützen Sie sich vor umlaufenden Teilen.
Beim Bohren in Wände, auf eventuell vor-
handene Gas-, Strom- und Wasserleitungen
achten.
Bei beschädigter Anschlussleitung, Ladegerät
nicht mehr benützen.
Keine defekten oder beschädigten Akkupacks
verwenden.
Verwenden Sie nur originale Festool-Akku-
packs. Verwenden Sie keine gebrauchten und
wieder aufbereiteten Akkupacks. Für Schäden
bei Verwendung von nicht originalen Festool-
Akkupacks haftet der Benutzer.
Verbrauchte Akkupacks nicht ins Feuer oder
in den Hausmüll werfen. Festool bietet eine
umweltgerechte Entsorgung von ver-
brauchten Akkupacks an (siehe auch Hinweise
unter AKKU-RECYCLING).
Akkupacks nicht öffnen.
Akkupacks nicht zusammen mit Metallgegen-
ständen aufbewahren (Kurzschlussgefahr).
Am Ladegerät dürfen in die Aufnahmen der
Akkupacks und durch die Lüftungsschlitze
hindurch ins Geräteinnere keine Metallteile
(z.B. Metallspäne) gelangen (Kurzschluss-
gefahr).
Reparaturen dürfen nur vom Fachmann aus-
geführt werden.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CDD 9.6 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CDD 9.6 V in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info