Manual Festool ATF 65 E (page 20 of 24) (English)

458693

Zoom out

Zoom in

1/24

sawing or the quality of cut has deteriorated. Take blunt saw

blades back to an authorised Customer Service Centre for

re-sharpening. Take the saw blades out when you want to

clean them of resin and wood. Use kerosene for cleaning the

saw blades.

6 Accessories

The order numbers of the accessories listed below can be

found in the Festool catalogue or on the Internet under

www.festool.com.

6.1 The parallel stop

The parallel stop can be used for cutting widths up to 180

mm. The parallel stop is fixed to the front of the saw bench

with the stop adapter:

- Insert the stop adapter (13.1) into the holder on the saw

bench.

- Tighten screw (13.4)

- Insert the parallel stop (13.2) into the stop adapter.

- Turn the rotary head (13.3) and by this means clamp the

parallel stop firmly. You can see the cutting width set on the

scale on the front edge of the stop adapter.

6.2 The Festool guide system FS

The guide rails, which are available in different lengths, allow

for precise, clean cuts and simultaneously protect the

workpiece surface against damage. The guide rail is 5 mm

thick. Hence, when the guide rail is used, always add 5 mm

when setting the cutting depth on the cutting depth scale.

In conjunction with the extensive range of accessories, exact

angled cuts, mitre cuts and fitting work can be completed

with the guide system.

The option of securing using G-clamps ensures a firm hold

and safe working.

The guide clearance of the saw table on the guide rails can be

set with the two setting jaws (14.1, 14.3). To do this, set the

circular saw on the guide rail (14.4), and, with a screwdriver

(14.2) adjust the screws on both guide jaws so that the circular

saw can still be moved easily on the guide rail, but free of

play.

The guide rails are equipped with a splinterguard (14.5), which

has to be cut to size before the first use:

- Set the speed of the machine to level 6,

- Place the machine on the rear end of the guide rail,

- Switch the machine on, press it down to the set cutting depth

and cut the splinterguard along the full length without

interruption. The edge of the splinterguard now corresponds

exactly to the cutting edge.

6.3 Multifunction table

The mutifunction table, which is available in two sizes (MFT

800, MFT 1080), makes clamping the workpiece easy and

allows you to saw large and small workpieces safely and

precisely using the guide system. Its many fields of application

make economical and ergonomically convenient work possible.

6.4 Saw blades, other accessories

In order to be able to saw different materials quickly and

cleanly, Festool offers saw blades that are specially designed

for your machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool ATF 65 E in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool ATF 65 E Manual

Product: