Manual Ferm WEM1041 - FWM 10-80 (page 3 of 54) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632782

Zoom out

Zoom in

1/54

Ferm 03

ARC WELDING INVERTER

The numbers in the following text refer to the illustrations on pages 2 + 106.

Read this manual thoroughly before using the device. This will allow you to better

understand your product and avoid any unnecessary risks. Follow the safety

instructions in this manual before you use the arc welder. Store this manual in a

safe place for future reference and only give the device to other people together

with this manual.

Area of application

The device is suitable for hand welding using coated electrodes of sizes 1.6 mm Ø, 2 mm Ø and

a maximum of 2.5 mm Ø. You can use the device for welding steel sheets from 1.5 mm up to

approximately 8 mm thick.

It is intended for both private and commercial use.

Table of contents

1. Device data

2. Safety regulations

3. Assembly and first-time use

4. Operation

5. Service and maintenance

1. DEVICE DATA

Technical data and type plate symbols

Table 1 - Page 106

Scope of delivery

Fig. 1

1. Inverter

2. Power cable

3. Electrode cable with electrode clamp (+)

4. Earth cable with earth clamp (-)

5. Carrying strap

Front side

Fig. 2

6. ON/OFF, current intensity and electrode diameter switch

7. Green LED showing that the unit is ready for operation

8. Yellow LED indicating an overload/overtemperature switch-off

9. Positive (+) connection for electrode cable

10. Negative (-) connection for earthing cable

FIN

106 Ferm

Spare parts list

No. Description Position

400920 Knob potentiometer 9

400921 Electrode holder 10

400922 Earth clamp 11

400923 Quick plug with cable 12

400924 Fan 17

400925 Carry belt 30

Serial No.

12,5A

16A

70V

16 A

22V

50A

80A

100%

30%

60%

23,2V

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm WEM1041 - FWM 10-80 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm WEM1041 - FWM 10-80 Manual

Product: