510125
3
Zoom out
Zoom in
Previous page
1/56
Next page
3
EN
TILE CUTTER
The numbers in the text refer to the diagrams
on page 2.
For your own safety and that of others, we
recommend that you read this instruction
manual carefully before using this saw.
Keep this instruction manual and the
documentation provided with the saw for
future reference.
Introduction
This tool is suitable for cutting various wall and
floor tiles with a maximum tile size of 500 x 500 x
35 mm. The diamond wheel can be replaced by
the customer. It is not permitted to use the tool for
any other materials.
Contents
1. Machine information
2. Safety instructions
3. Assembly
4. Operation
5. Service & maintenance
1. MACHINE INFORMATION
Technical specifications
Voltage 230 V~
Frequency 50 Hz
Power consumption 600W/S2=10 min*
IP Class IP54
No load speed 2950/min
Max. depth of cut 90º 34 mm
Max. depth of cut 45º 18 mm
Cutting angle 0 - 45°
Ø Cutting blade Ø180 x Ø22.2 x 2.2 mm
Table dimensions 360 x 330 mm
Lpa (sound pressure level) 92+3 dB(A)
Lwa (sound power level) 105+3 dB(A)
Vibration <2.5 m/s
2
*S2= Maximum period of operation with a
capacity of 600 W
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in EN
61029; it may be used to compare one tool with
another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of
vibration by maintaining the tool and its
accessories, keeping your hands warm, and
organizing your work patterns.
Contents of packing
1 Tile cutter
1 Water tray
1 Full-length adjustable fence
1 Set of instructions
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories
for transport damage.
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the
mains electricity in the case that the cord
gets damaged and during maintenance.
Wear ear and eye protection.
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm TCM1010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm TCM1010 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 5,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferm TCM1010

Ferm TCM1010 User Manual - English, German, Dutch, French, Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info