Manual Ferm TCM1006 - FTZ-600 (page 3 of 44) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632937

Zoom out

Zoom in

1/44

Ferm

FIN

Ferm Ferm 3

TILE CUTTER

The numbers in the text refer to the diagrams on pages 2

For your own safety and that of others, we recommend that you read this instruction

manual carefully before using this saw. Keep this instruction manual and the

documentation provided with the saw for future reference.

Introduction

This tool is suitable for cutting various wall and floor tiles with a maximum tile size of 500 x 500 x

35 mm. The diamond wheel can be replaced by the customer. It is not permitted to use the tool

for any other materials.

Contents

1. Machine information

2. Safety instructions

3. Assembly

4. Operation

5. Service & maintenance

1. MACHINE INFORMATION

Technical specifications

*S2= Maximum period of operation with a capacity of 600 W

Contents of packing

1 Tile cutter

1 Water tray

1 Full-length adjustable fence

1 Mitre guide

Voltage 230 V~

Frequency 50 Hz

Power consumption 600W/S2=30 min*, 500W/S1

IPClass IP54

No load speed 2950/min

Max. depth of cut 90º 35 mm

Max. depth of cut 45º 20 mm

Cutting angle 0 - 45°

Ø Cutting blade ∅180 x ∅22.2 x 2.2 mm

Table dimensions 360 x 330 mm

Lpa (sound pressure level) 63 dB(A)

Lwa (sound power level) 76 dB(A)

Vibration 1.134 m/s

FIN

Spare parts list

Ref. No. Description Ferm no.

1 Fixed sheet 407101

2 Guide 407102

3 Knob 407455

5 t/m 7 Upper safeguard complete 407103

10 Riving knife 407104

13 Foot 407105

16 Knob 407456

24+25 Lower safeguard with cover 407106

28 Water tank 407107

29 Inner flange 407108

30 Diamant cutting disc 180x22,2x2,2 TCA1004

31 Outer flange 407109

32 Nut 407110

33 Angle guide 407111

34 Switch 407112

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm TCM1006 - FTZ-600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm TCM1006 - FTZ-600 Manual

Product: