SPARE PARTS
REF.NR. DESCRIPTION FERM NR.
5 BASE PLATE 406763
5 BASE PLATE 406763
8/9/10 CARBON BRUSH (SET) 700000
11 CARBON BRUSH CAP 700001
16 STATOR 700002
22 AUXILIARY HANDLE 700003
24 SWITCH 700004
27 ROTOR 700005
37 GEAR 700006
38 FLANGE (OUTSIDE) 700007
42 SPLITTER 700008
43 SPRING 700015
44 SAW BLADE PROTECTION COVER 700009
45 HARD METAL SAW BLADE Ø 160 mm 310310
46 FLANGE (INSIDE) 700010
47 LEFT BOLT FOR SAW BLADE 700011
50 SOCKET SPANNER 700012
55 PARALLEL GUIDE 700013
61 GUIDE PLATE 700014
66 Ferm
Circular saw
THE NUMBERS IN THE FOLLOWING TEXT COR-
RESPOND WITH THE PICTURES AT PAGE 2.
The pictures mentioned in the text correspond with
the pictures at page 2.
TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
Fig. A.
1. Handle
2. Spindle lock
3. On/off switch
4. Depth of cut adjusting knob
5. Mains lead
6. Riving knife
7. Blade guard
8. Hexagonal bolt
9. Shoe
10. Flange
11. Saw Blade
12. Parallel stop
13. Parallel guide adjusting knob
14. Cutting angle adjustingknob
PACKAGE CONTENTS
Circular saw
Box wrench 13 mm
Saw blade Ø 160 mm
Parallel stop
Check first whether or not the delivery has been damaged
by transport and/or whether all the parts are present.
SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
Always check that the power supply corre-
sponds to the voltage on the rating plate.
The machine is double insulated in accordance
with EN50144; therefore no earth wire is requi-
red.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor size
is 1.5 mm
2
. When using a cable reel always unwind the
reel completely.
BEFORE USING THE CIRCULAR SAW:
1. Check the following points:
- do the voltage of the motor correspond to the
mains voltage (appliances for a mains voltage of
230 V
- are the mains lead and the mains plug in a good
condition: solid, without any loose ends or
damage;
- if the saw blade is missing any teeth, or if it shows
any cracks, it must be replaced immediately.
- Make sure the blade is secure.
- Use this circular saw to saw only wood, wood-like
products.
2. Do not use circular saw blades wich are deformed or
damaged.
3. Do not use HSS blades.
4. Only use blades meeting the required dimensions, as
well as data and descriptions;
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1050 W
No load speed | 4000/min.
Saw blade dimensions | 160x1.8x20 mm
Number of teeths | Z18
Weight | 4 kg
Lpa (sound pressure level) | 100.2 dB(A)
Lwa (sound power level) | 113.3 dB(A)
aw(vibration value) | 32.4 m/s
2
