Manual Ferm HGM1003 - FHT 510E (page 4 of 28) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632722

Zoom out

Zoom in

1/28

Ferm 53

• Only use spare parts and attachments supplied by

Ferm. Use of attachments other than those supplied

or recommended by Ferm will invalidate your

guarantee and could be dangerous.

• Do not allow the power cord to lay on or across

sharp objects that might pierce the outer insulation.

Carry out a visual inspection of the power cord

before use and if it is damaged, have it replaced by a

specialist service centre. Do not use the appliance if

the cord is damaged.

ABOVE ALL - BE CAREFUL!

MAINS PLUG REPLACEMENT

If you are in any doubt whatsoever regarding removing

the old plug and reconnecting a new one, you should

contact a competent electrician to do it for you.

• Disconnect the plug from the electric socket.

• Cut off the old plug and dispose of it safely. Under no

circumstances should anyone be able to find and use

a plug with exposed wires.

• Only fit an approved plug with the correctly rated

fuse.

• Attach the cores (wires) to their respective

terminals.

BROWN- L (Live)

BLUE- N (Neutral)

Ensure the outer cable (sheath) is firmly clamped in place

to avoid strain on the wires at the terminals.

Connecting to the Power Supply

Your trimmer is supplied with a non-rewireable

moulded plug and cable, incorporating a fuse. Should the

fuse need to be replaced at any time it must be replaced

with an approved to BS1362 fuse the same rating as the

one you are replacing. The fuse cover is detachable.

Never use the plug with the cover off.

Warning! This appliance is double insulated and

MUST NOT BE EARTHED.

If you have to rewire the plug at any time please connect

as follows:

Attach the blue cable (Neutral) to the terminal marked

N or coloured black or blue.

Attach the brown cable (Live) to the terminal marked L

or coloured red or brown.

DOUBLE INSULATED

This power tool is double insulated. All the external

parts are insulated from the mains power supply. This

makes it unnecessary for this power tool to be earthed.

Using Extension cables

All electrical connections e.g. extension cable, must be

of an approved waterproof type for outdoor use and

marked accordingly. Extension cables must be three-

core, one of which is EARTH.

As a supply for this machine always use an extension

cable of at least 0.75 mm

Always fully unwind extension cables before use.

SPECIFIC SAFETY WARNINGS

Attention: Danger!

• The cutting elements continue to move after the

motor is switch off.

• If the cord becomes damaged during use, disconnect

the cord from the power supply immediately. DO

NOT TOUCH THE CORD BEFORE

DISCONNECTING THE SUPPLY. Do not use the

appliance if the appliance cord or the extension cord

are damaged.

• Keep extension cord away from cutting elements.

• Always ensure the guards are fitted when using the

tool.

• Check the cable for damage before starting work and

replace if necessary.

• Inspect and maintain the trimmer regularly. Have the

trimmer repaired only by an authorised repairer.

• Keep your hands and feet away from the cutting area

at all times.

• Always hold the trimmer at a safe distance from the

body.

• Always wear protective goggles.

• Always wear gloves.

• Only use the trimmer in daylight.

• Ensure the ventilation openings are clear of debris at

all times.

• Ensure there are no people of animals within 5

metres of your trimming area.

• Remove the plug from the power socket before

attempting any maintenance.

• After use the tool should be stored so that the blade

is not exposed.

OPERATING INSTRUCTIONS

ASSEMBLY

Fig.2

Attach the safety guard (5) at the front/side of the body

in the positions shown. Attach it using the four self-

tapping screws (1) supplied.

USING THE CORD GRIP

To help secure the plug to the extension cord, make a

loop in the extension cord and attach it to the cord grip

as shown (see fig. 3). Once secure, attach the cord to the

plug. This will prevent accidental 'pull-out'.

USING YOUR HEDGE TRIMMER

For your own safety and for best results read the

following user advice and do not use this product for

anything other than its intended purpose.

Switching ON and OFF

Fig.1

• To switch the trimmer on, press the ON/OFF trigger

(6) and the start switch (2) at the same time.

• To switch off, release one or both switches.

Note: If you notice a slight burning smell, it is nothing to

worry about. It is the electric brake working.

4 Ferm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm HGM1003 - FHT 510E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm HGM1003 - FHT 510E Manual

Product: