110232

Ferm FRS-710 Manual

3
Zoom out
Zoom in
Previous page
1/52
Next page
Ferm 3
GB
RECIPROCATING SAW
The numbers in the following text
correspond with the pictures at page 2
TECHNICAL SPECIFICATIONS
Voltage | 230 V~
Frequency | 50 Hz
Power input | 710 W
No load speed | 600-2500/min
Maximum cutting thickness | 115 mm
Stroke length | 30 mm
Weight | 3.3 kg
Lpa (sound pressure level) | 92.3 dB(A)
Lwa (sound pressure capacity) | 103.3 dB(A)
Vibration value | 11.3 m/s
2
PRODUCT INFORMATION
Fig.A
1. Blade
2. Footplate
3. Blade clamp screw
4. Trigger switch
5. Speed controller
6. Trigger lock button
7. Mains lead
8. Footplate length adjustment screws
9. 3 mm hexagon key (not s hown)
10. 4 mm hexagon key (not shown)
SAFETY INSTRUCTIONS
The following pictograms are used in these
instructions for use:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Denotes risk of electric shock.
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
Carefully read this manual before using the
machine. Make sure that you know how the
machine functions and how to operate it.
Maintain the machine in accordance with
the instructions to make sure it functions
properly. Keep this manual and the enclosed
documentation with the machine.
When using electric machines always
observe the safety regulations applicable
in your country to reduce the risk of fire,
electric shock and personal injury. Read the
following safety instructions and also the
enclosed safety instructions.
Keep these instructions in a safe place!
ADDITIONAL SAFETY INSTRUCTIONS
The machine must not be damp and must
not be operated in a wet environment.
Always inspect cable and plug before using
machine. Only have damage repaired by a
qualified professional.
Only insert the plug into the mains socket
when the machine is switched off. Wear
protective gloves and sturdy footwear.
Do not saw materials containing
asbestos!!!
• Wearprotectivegoggleswhenworkingwith
materials which produce large amounts of
chips.
• Wearaprotectivemaskwhensawingother
fibrous materials.
• Portableequipmentusedoutdoorsmust
be connected with a fault-current circuit
breaker.
• Extensioncablesandplugsmustbe
approved for outdoors.
• Removeadjustingkeysandwrenches
before turning the tool on.
• Secureyourworkpiecewithclamps.Always
lead cable away from machine towards the
rear.
• Movemachinetowardstheworkpieceonly
when switched on.
• Alwaysholdmachinewithbothhandsand
ensure that you have a safe footing while
working.
• Themachinemaybeoperatedonlywiththe
foot plate mounted. When sawing, the foot
plate must always rest on the workpiece.
RSM1011 Ma # 0810-10.1 FC.indd 3 10/10/08 4:59:41 PM
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm FRS-710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FRS-710 in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info