Manual Ferm FLS400 (page 2 of 6) (English, German, Dutch, Danish, French)

475720

Zoom out

Zoom in

1/6

6. VEDLIGEHOLDELSE

Ved vedligeholdelse og reng ring af pen-

geskabet skal batterierne altid fjernes.

Brug aldrig vand eller andre væsker tilat

rengøre pengeskabets elektriske dele med.

Brug aldrigletantændelige væsker til

rengøring af pengeskabet.

UDSKIFTNING AF BATTERIERNE

- Der bruges fire 1,5 volts batterier (type D, LR20)

tilpengeskabets forsyningsspænding.

- Når den røde lampe begynder at blinke, skal batte-

rierne udskiftes. Herefter skal der indprogramme-

res en ny kode.

- De kan afprøve batterierne ved at trykke på tast

“B”. Hvisden røde lampe begynder at blinke i det

samme, skal batterierne udskiftes. Hvis der ikke

sker noget, efter at De har

trykket på “B”, er batterierne i orden.

- Hvis batteriernes ladetilstand er utilstrækkelig,

skal batterierne udskiftes inden for en måneds tid.

- Når den r de lampe lyser og begynder at blinke,

skal batterierne udskiftes inden for en måneds tid.

- Åbn pengeskabet ved hjælp af koden eller den spe-

cielle nøgle.

- I dørens venstre inderside er der en lille forskyde-

ligeklap. Bag ved klappen er de fire batterier place-

ret i en plasticbeholder.

- Udskift de fire 1,5 volts batterier (type D) med

nye.

- Anbring klappen igen i den oprindelige position.

- Nulstil nu koden ved at trykke på den røde knap på

dørens inderside.

- Programmér nu koden som beskrevet i kapitel 5.

- Pengeskabet er nu igen klar til brug.

GENNEM REGELMÆSSIG VEDLIGEHOL-

DELSE AF PENGESKABET UNDGÅS UN

DVENDIGE PROBLEMER!

7. FEJL

Hvis pengeskabet ikke virker som det skal, kan neden-

nævnte mulige årsager og tilhørende råd til afhjælpning

være praktiske.

1. Pengeskabet kan ikke åbnes.

Der er indtastet en forkert kode.

- Se kapitel 5 for at åbne pengeskabet.

2. Pengeskabet kan ikke programmeres.

Kontrollér batterierne:

- Udskift batterierne, om nødvendigt.

Den røde lampe blinker:

- Udskift batterierne.

ClEl

■

KONFORMITETSERKLÆRING

(

)

Vi erklærer at under almindeligt ansvar, at dette

produkt er i overenstemmelse med følgende

normer eller normative dokumenter

EN50081-1, EN-50082-1, EN55022

EN61000-4-2, 61000-4-3

i henhold til bestemmelserne i direktiverne:

89/336/EEC

92/31/EEC

93/68/EEC

frà 23-02-2000

GENEMUIDEN NL

W. Kamphof

Quality department

Ferm 11

Product: Ferm Electronic Safe

Type FLS-400, art.nr. 380400

Security devices Electr. code, emergency key

Ferm, Genemuiden, The Netherlands

CAREFULLY READ THE INSTRUCTIONS

BEFORE YOU USE THE SAFE!

1. INTRODUCTION

The safe is suitable for putting away valuables from

theft. It has no fire proof construction and is therefore

not fire safe! In case of fire the safe can be opened by

the emergency key. Consult, if necessary, your supplier.

2. SAFETY RULES

1. Don’t place the safe in a humid room.

2. Use the safe for its intended purpose only.

3. ENVIRONMENTAL PROTECTION

Recycling raw materials is prefered to dumping them

as waste. To prevent the machine from being damaged

during transport its packing must be strong. Insofar as

possible the packing consists of recyclable materials.

Because recycling is better for the environment, we

suggest you use as much as possible the recycling

methods.

Your safe contains batteries. Never

waste the batteries when they are

empty, but hand them in as "Small

Chemical Waste".

4. INSTALLATION

INSTALLING THE SAFE

The safe can be placed anywhere.

However, if use wish to make use of the optimal safety

features, the safe can be placed on a shelf or in a cup-

board.

Mark 4 holes on the base. Then drill 4 holes in the base

and place the bolts in the holes. You can then place the

safe on them and tighten the nuts inside the safe.

Do not immure the safe! In case of break in

transmission Ferm B.V. cannot be hold

responsible for the costs made for detaching

the safe.

5. USING THE SAFE

First, open the door of your safe, without turning rota-

ry knob before you start to program your safe. Remo-

ve the adhesive tape from the doorlock, place the bat-

teries into battery holder and proceed directly with

the programming of your code into the memory.

HOW TO PROGRAMM THE SAFE

- Press the mode reset button situated on the inside

of the door, causing the yellow indicator to illumi-

nate. You will hear two short beeps, indicating the

pre-set code has been erased.

- You can now enter a new code of 12 digits maxi-

mum, followed by the letter “B”,

OPENING THE SAFE

-You can open the safe by entering the code after

which the green indicator will illuminate.

You have 5 seconds to open the safe. When you

have entered the wrong code three times in suc-

cession, you will be unable to open the safe for 20

seconds. Should you once afain enter the wrong

code, you will have to wait 5 minutes before trying

to unlock the safe. After entering another wrong

code you will be unable to unlock the safe for at

least one hour.

LOCKING THE SAFE

Closing the door and turning the selector knob anti-

clockwise will lock the safe.

EMERGENCY KEYS

- These keys allow you to open the safe at all times,

even when the batteries are run down or when

you have forgotten the code.

- The key hole is situated behind the cover plate or

sticker between the button and the coding key-

English

W X D X H W X D X H Type D MN 1300

(mm) (mm) LR20

FLS-400 380400 350x360x380 344x300x374 4 x 1,5V 25,5

2 Ferm

ART.NR

TYPE

mm x mm x mm

kg.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FLS400 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm FLS400 Manual

Product: