Manual Ferm ETM1005 (page 5 of 42) (English, German, Dutch, French, Italian, Spanish)

764189

Zoom out

Zoom in

1/42

d) During charging, batteries must be placed

in the well ventilated area!

Before using the tacker

• Always wear eye protection when using the

tool.

• Maintain the tool with care.

• Check for misalignment or binding of moving

parts, breakage of parts, and any other

condition that may affect the tools operation. If

damaged, have the tool serviced before using.

• Check if the slide cartridge has been fastened

properly.

• Do not use the tool in a humid environment.

• Do not use the tool on materials containing

asbestos.

Using the tool

• Do not use the tool if the switch does not turn

it “ON” or “OFF”.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Remove all staples from the magazine

after each use

3. USE

The machine must be charged before

first use.

Charging the machine (with the charger

adaptor)

Fig. B

The machine can be charged by the charger

adapter or by your USB mobile phone charger.

• If needed, connect the USB cable to the

charger adaptor by pushing its USB plug in the

charger adaptor’s USB socket.

• Plug the small cable plug into the machine’s

charging socket.

• Plug the charger into an electrical outlet and

wait for a while. The LED indicator on the

machine will lighten up and show the charging

status.

Charging the machine (on a USB socket)

Fig. C

• If needed, remove the USB cable from the

charger adaptor by pulling it out of the USB

socket.

• Plug the small cable plug into the machine’s

charging socket.

• Plug the cable USB plug into USB device (for

example on your mobile phone charger).

• Make sure the USB device is powered or

switched on.

• Check charging status by checking if the

charging indicator light on the machine is

burning.

Charging indication light

Fig.A

The machine has a charging indication light which

indicates the status of the charging process:

LED color Status

Red Battery charging in progress

Green Battery charging finished, battery fully charged

• After the battery is fully charged remove the

charger plug from the outlet and remove the

cable from the machine.

Lithium-Ion cells can be stored for a long

period without losing much of their

charge. When the machine is not being

used over a longer period of time it is

best to store the battery in charged

condition.

Application

Fig. 2

For this tool, use one of the following types

staples:

• U Type 530: 6-12 mm

Loading the tacker

Before opening the tool, make sure the

tool is switched off.

To load the tacker

Fig. 3 - 4

Replacing staples

• Press the slide unlock (2) to unlock the slide.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm ETM1005 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm ETM1005 Manual

Product: