763827
3
Zoom out
Zoom in
Previous page
1/20
Next page
ClEl
KONFORMITETSERKLÆRING (DK)
Vi erklærer at under almindeligt ansvar, at dette
produkt er i overenstemmelse med følgende
normer eller normative dokumenter
EN50144-1, EN50144-2-4,
EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
i henhold til bestemmelserne i direktiverne:
98/37EEC,
73/23EEC,
89/336EEC
frà 01-09-2000
GENEMUIDEN NL
G.M. Ensing
Quality department
38 Ferm
TECHNICAL SPECIFICATIONS
Voltage 230 V
Frequency 50 Hz
Power consumption 240 W
No load speed 6000-8500/min
Weight 1.62 kg
Lpa(noise burden) 77.4 dB(A)
Lwa(noise capacity) 90.4 dB(A)
Vibration value 3.69 m/s2
Electrical safety
Always check that the mains voltage corres-
ponds to the value on the model plate.
The machine has double insulation in accordan-
ce with EN 50144; an earth wire is therefore not
required..
When replacing leads or plugs
Always immediately dispose of old leads or plugs as soon
as they have been replaced by new ones. It is dangerous
to put a loose plug into a socket.
When using extension cables
Only use an approved extension cable which is suitable
for the voltage of the machine. The conductors must have
a surface area of at least 1.5 mm2. If the extension cable is
on a reel, unroll it completely.
CONTENTS OF THE PACKAGING
The packaging contains:
1 Sander
1 Triangular sanding foot
1 Rotating sanding foot
2 Detail sanding feet
1 Scraper
1 Adapter
1 Allenkey
3 pieces of sandpaper for the triangular sanding foot
3 pieces of sandpaper for the rotating sanding foot
2 pieces of sandpaper for the detail sanding feet
1 case
1 Instructions
1 safety section
1 warranty card
Check the machine and accessories for transport dama-
ge.
PRODUCTINFORMATION:
Fig. A.
The Ferm FCS-180 Combisander is a versatile machine
with which you can easily sand large surfaces, corners
and even round or small parts. The Combisander can be
used to sand wooden and metal surfaces.
In addition the machine is delivered with a scraper which
can be used to easily remove loose paint layers and re-
mains of glue from the area to be sanded.
Ferm 3
AVAILABLE SPARE PARTS FOR FERM FCS-180
REF.NR. DESCRIPTION FERM NR.
007 SWITCH 301120
014 PINION GEAR 301121
017 ROTOR 301122
019 STATOR 301123
021 PCB 301124
022 TILL 034 DRIVE MECHANISM COMPLETE 301125
025 SPINDLE GEAR 301126
037 ELASTIC PILLAR 301127
038 ELASTIC PILLAR 301128
044 DELTA SANDING PAD 301129
045 ROTARY SANDING PAD 301130
046 SCRAPER 301131
048 BASE FOR SCRAPER AND CONTOUR SANDER 301132
051 TILL 054 CARBON BRUSH SET COMPLETE 301133
055 U-SHAPE CONTOUR SANDER 301134
056 Y--SHAPE CONTOUR SANDER 301135
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm DSM1008 - FCS-180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm DSM1008 - FCS-180 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info