763358
3
Zoom out
Zoom in
Previous page
1/30
Next page
58 Ferm
CIRCULAR SAW
THE PICTURES MENTIONED IN THE TEXT ARE
CORRESPONDING WITH THE PICTURES AT
PAGE 2.
CONTENTS
1. Technical specifitions
2. Safety instructions
3. Assembly and adjusting instructions
4. Operation
5. Maintenance
1. TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
Fig.A
1. Handgrip
2. Type plate
3. On/off switch
4. Cut depth clamping knob
5. Power cord
6. Riving knife
7. Saw blade safety guard
8. Hexagon screw
9. Soleplate
10. Retaining ring
11. Saw blade
12. Rip fence
13. Rip fence clamping knob
14. Sawing angle clamping knob
- Shaft locking knob (Fig. D2)
15. Laser switch
UNPACKING
The circular handsaw is shipped with:
1 Rip fence
2X TCT Saw blade Ø 165 mm
1 Allen key
1 Set of carbon brushes
1 2 Batteries
Check first whether or not the delivery has been
damaged by transport and/or whether all the parts are
present.
2. SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Danger of bodily injury or material damage.
Indicates electrical shock hazard.
CE Conforms to the applicable European safety
standards
Class II equipment – double insulated – the plug
does not have to be earthed
Read the instructions
Keep bystanders at a distance
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Wear eye and ear protectors
Caution! Laser beam! Never look into the light
beam and never aim the laser at a person when it is
switched on.
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the
appropriate recycling locations.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
Always check that the power supply corres-ponds
to the voltage on the rating plate.
Class II equipment – double insulated – the plug
does not have to be earthed
Replacing cables or plugs
If the mains cable becomes damaged, it must be replaced
with a special mains cable available from the
manufacturer or the manufacturer’s customer service.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1200 W
No load speed | 4500/min.
Saw blade dimensions | 165x20x2.8 mm
Number of teeths | Z14
Weight | 3.96 kg
Lpa (sound pressure level) | 88.0 dB(A)
Lwa (sound power level) | 101.0 dB(A)
aw(vibration value) | 1.604 m/s2
Ferm 3
SPARE PARTS LIST FKS-165L
REF NR DESCRIPTION FERM NR
2 CARBON BRUSH HOLDER 409400
3 CARBON BRUSH SET 409401
4 CARBON BRUSH CAP 409402
6 STATOR 409403
10 BALL BEARING 607 Z 800607
11 ROTOR 409404
12 SELF-LOCKING PLATE 409405
13 RETURN SPRING 409406
14 BALL BEARING 6000Z 806000
22 BALL BEARING 6001 ZZ 806001
24 SHAFT 409407
27 SOCKET HEAD SCREW 409408
28 OUTER FLANGE 409409
30 INNER FLANGE 409410
39 BASE 409411
41 CHECH SCREW 409412
42 NUT 409413
47 + 48 SWITCH + CAPACITOR 409414
54 SPANNER 409415
56 GEAR 409416
60 GUIDE 409419
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CSM1016 - FKS-165L2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CSM1016 - FKS-165L2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info