763361
3
Zoom out
Zoom in
Previous page
1/28
Next page
54 Ferm
CIRCULAR SAW
THE PICTURES MENTIONED IN THE TEXT ARE
CORRESPONDING WITH THE PICTURES AT
PAGE 2.
SAFETY AND OPERATING INSTRUCTIONS
For your own safety and for the safety of others,
please read these instructions carefully before
using this appliance. It will help you understand your product
more easily and avoid unnecessary risks. Keep this instruction
manual in a safe place for future use.
CONTENTS
1. Machine data
2. Safety instructions
3. Assembly and adjusting instructions
4. Operation
5. Maintenance
1. MACHINE DATA
TECHNICAL SPECIFICATION
PRODUCT INFORMATION
Fig. A.
1. Handgrip
1A.Extra handgrip
2. Type plate
3. On/off switch
4. Handle to set sawing depth
5. Power cord
6. Riving knife
7. Saw blade safety guard
8. Hexagonal bolt
9. Soleplate
10. Flange
11. Saw blade
12. Rip fence
13. Rip fence clamping knob
14. Handle to set sawing angle
- Shaft lock (Fig. C3)
UNPACKING
The circular handsaw is shipped with:
- Rip fence
- TCT Saw blade Ø 210 mm
-Box spanner
Check first whether or not the delivery has been
damaged by transport and/or whether all the parts are
present.
2. SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Keep bystanders away
Wear ear and eye protection
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
Always check that the power supply corresponds to
the voltage on the rating plate.
Class II machine – Double insulation – You don’t
need any earthed plug.
Replacing cables or plugs
If the mains cable becomes damaged, it must be replaced
with a special mains cable available from the
manufacturer or the manufacturer’s customer service.
Dispose of old cables or plugs immediately after
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1800 W
No load speed | 5000/min.
Saw blade dimensions | Ø210 x Ø30x 2,4 mm
Number of teeths | Z40
Weight | 6,4kg
Lpa (sound pressure level) | 97,2 dB(A)
Lwa (sound power level) | 110,2 dB(A)
aw(vibration value) | 1.138 m/s2
Ferm 3
SPARE PARTS
REF.NR. DESCRIPTION FERM NR.
5 CARBON BRUSH HOLDER 409400
6 CARBON BRUSH SET (2 PCS) 409401
7 CARBON BRUSH CAP 409402
10 STATOR 409403
14 BALL BEARING 607 Z 800607
15 ROTOR 409404
16 BALL BEARING 6000 Z 806000
43+44 SWITCH + CAPACITOR 409414
55 GEAR 409416
59 BALL BEARING 6001 ZZ 806001
74 INNER FLANGE 409410
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CSM1012 - FKS-210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CSM1012 - FKS-210 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info