Manual Ferm CRM1007 FCN-600K - 235210 (page 5 of 6) (English, Dutch)

538639

Zoom out

Zoom in

1/6

TECHNISCHE GEGEVENS

Voltage 230 V

Frequentie 50 Hz

Opgenomen vermogen 1500 W

Zekering 13 A

Pompcapaciteit 170 l/min.

Ketelinhoud 6 ltr

Werktemperatuur Min/Max. -10/+45 °C

Gewicht 15 kg.

(geluidsdrukniveau) 85,7 dB(A)

(geluidsvermogenniveau) 98,7 dB(A)

Elektrische veiligheid

Controleer altijd of uw netspanning overeen-

komt met de waarde op het typeplaatje.

Controleer regelmatig alle elektrische aansluitingen en

de conditie van de bedrading op beschadigingen. Gevon-

den defecten dienen onmiddellijk te worden gerepareerd

voordat u de machine weer in gebruik neemt. Laat de

bedrading altijd door een gekwalificeerde elektromonteur

nakijken.

Tijdens het werken met het apparaat dient u alle kabels en

verlengkabels vrij te houden van snijdend gereedschap,

scherpe voorwerpen of andere gevaarlijke omstandighe-

den in de werkplaats, zoals natte vloeren of chemicaliën.

Dit apparaat dient met een zekering van 13A te worden

beveiligd.

Ter voorkoming van elektrische schokken dient dit appa-

raat niet aan regen of vocht te worden blootgesteld. In het

apparaat bevinden zich geen onderdelen die gerepa-

reerd kunnen worden. Laat eventuele reparaties altijd

door een gekwalificeerde monteur uitvoeren. Verwijder

nooit delen van de behuizing tenzij u ervoor gekwalifi-

ceerd bent. In dit apparaat komen gevaarlijke spanningen

voor.

Bij gebruik van verlengsnoeren

Gebruik uitsluitend een goedgekeurd verlengsnoer, dat

geschikt is voor het vermogen van de machine. De aders

moeten een doorsnede hebben van minimaal 1,5 mm

Wanneer het verlengsnoer op een haspel zit, rol het snoer

dan helemaal af.

3. OMSCHRIJVING

Fig. 3.1

1. Aan/uit-schakelaar

2. Drukregelaar

3. Drukschakelaar

4. Drukmeter luchtinlaat

5. Ontluchtingsklep

6. Snelkoppeling

7. Tacker

8. Bevestigingsschroef kap

9. Kap

8 Ferm

5. NAIL GUN OPERATING INSTRUCTIONS

Fig. 5.1

GENERAL

The nailing gun must be used with the air compressor and

hose supplied. The nailing gun is designed to fire 18

gauge brad nails from 15mm to 50mm long, into timber.

The maximum operating pressure of the nailing gun is

6.12 bar or 90 p.s.i. Use only Performance Power Brad

Nails with this gun. Always wear leather gloves and eye

protection when using this product.

Fig. 5.2

OPERATION

Before each period

of use, insert seve-

ral drops of airline

lubricating oil, using

the oiler provided,

into the air intake

connector. The nail

gun must be regularly lubricated. Always use airline-lubri-

cating oil. Do not connect the airline until the nail gun is

loaded with nails. To load the nail gun with nails, press the

clasp (Figs. 5.1 & 5.2), and slide the magazine out.

Fig. 5.3

Insert the nails and

slide back the

magazine, ensuring

that it is securely

locked back on the

clasp. Connect the

airline to the quick fit

coupler with the air

outlet tap on the

compressor swit-

ched off.

Slowly open the air outlet tap and adjust the red outlet

pressure regulator, with the air compressor tank fully

charged.

TO USE THE NAIL GUN

Hold the Nail gun in one hand and keep the other hand well

away. Firstly push the nose of the nailer firmly onto the

tumbler at the point that is to be nailed. This will depress

the safety switch.

Ferm 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CRM1007 FCN-600K - 235210 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CRM1007 FCN-600K - 235210 Manual

Product: