Manual Ferm CDM1049 - FCS 360LK (page 6 of 30) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632686

Zoom out

Zoom in

1/30

Ferm 55

LEDNINGSFRI SKRUETRÆKKER FCS-360LK

Læs denne brugervejledning godt igennem, før du tager maskinen i brug. Sørg for, at

du har kendskab til, hvordan maskinen fungerer, og hvordan den skal betjenes.

Vedligehold maskinen ifølge instruktionerne, så den altid fungerer optimalt.

Opbevar denne brugervejledning og den vedlagte dokumentation sammen med maskinen.

NUMRENE I DEN FØLGENDE TEKST HENVISER TIL ILLUSTRATIONERNE PÅ SIDE 2-4

Indledning

Denne skruetrækker er tilsigtet stramning og frigørelse af skruer (fig. 2 - 6).

Indhold:

1. Tekniske specifikationer

2. Sikkerhedsinstruktioner

3. Montering af tilbehør

4. Drift

5. Opladning af batteriet

6. Vedligeholdelse

Pakken indeholder

1 Accu skruetrækker

1 Oplader

1 Magnetisk bitholder

8 Tilbehør

1 Brugsanvisning

1 Sikkerhedsinstruktioner

1 Garantibevis

Kontroller maskinen, løse dele og tilbehør for transportskade.

Tekniske specifikationer

KOMPONENTER

Fig. 1

1. Holder

2. Afbryderknap

3. Blødt greb

4. LED (indikationslampe)

5. Opladningsforbindelse

6. Forlængerdel

7. Tilbehør

Oplader | 3,6 V / 600 mA

Frekvens | 50 Hz

Batterikapacitet | 1,1 Ah

Opladningstid | < 5 timer

Maks. drejningsmoment | 3.0 Nm

Ubelastet hastighed | 230 r/min

Vægt | 340 gr.

LPA | 58.1 dB(A)

LWA | 69.1 dB(A)

Vibration | < 2,5 m/s

1. TEKNISKE SPECIFIKATIONER

6 Ferm

The following symbols are used in these instructions for use:

In accordance with essential applicable safety standards of European directives

The charging adapter is double insulated in

accordance with EN-60335; therefore no earth wire is required.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-

observance of the instructions in this manual.

Indicates electrical shock hazard.

Read instructions carefully

Indoor use only

In case of failure, the transformer is not dangerous

Thermic protector

Faulty and/or discarded electrical or electronic apparatus have to be collected at the

appropriate recycling locations.

ADDITIONAL SAFETY INSTRUCTIONS

1. Only use the accumulator block with the battery charger provided – using other chargers

could be dangerous.

2. Keep the accumulator block, tool and battery charger away from damp and wet

conditions.

3. Before using the battery charger, check all wires are properly connected.

4. If any wires on the charger are damaged, do not use it until these have been replaced.

5. When the charger is not in use it should not be plugged in. When unplugging, do not pull

the plug out by the cable.

6. If the charger breaks down or suffers from other technical problems, take it to a

recognised dealership to be checked before using it again. Any damaged parts must be

replaced.

7. Take care when handling the accumulator block, do not drop it or knock it against other

things.

8. Never attempt to repair the battery charger or accumulator block yourself; this can be

extremely dangerous. Repairs should always be carried out by a

recognised dealership.

9. Always unplug the charger before cleaning or carrying out any other maintenance on it.

2. SAFETY INSTRUCTIONS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CDM1049 - FCS 360LK in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CDM1049 - FCS 360LK Manual

Product: