Manual Ferm BCM1017 (page 4 of 68) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

510135

Zoom out

Zoom in

1/68

Ferm4

5. Store tools in a safe place.

Tools that are not used must be stored in a

dry and locked placed, out of the reach of

children.

6. Do not force the tool.

The machine will do the job better and

safer at the rate for which it was intended.

Damage caused by forcing the tool is not

covered by the warranty.

7. Use the right type of tool.

Do not use low-powered tools for heavy-

duty operations. Never use the machine

other than for its intended purpose.

8. Cable.

Never carry the tool by its cable and do not

tug at the cable to pull the plug from the

socket. Keep the cable away from heat, oil

and sharp edges.

9. Maintain the tool with care.

• Thetoolworksbestandsafestifitis

kept clean.

• Observetheinstructionsfor

maintenance and changing

accessories. Keep the tool dry and free

from oil and grease.

10. Disconnect the machine.

Disconnect the machine when you do not

use it, before cleaning and when changing

accessories and tools.

11. Extension cable for outdoor use.

When working outdoors use only extension

cables suitable for this purpose and marked

as such. When using machines with earth-

connection, use an extension cable with

earth-connection.

12. Stay alert.

Watch what you are doing, use your

common sense, do not operate the tool

when you cannot concentrate on the job.

13. Check the machine for damage.

• Beforestartingthemachine,checkthat

all safety devices and damaged parts

operate smoothly and efficiently;

• Ifnotstatedotherwiseinthismanual,

damaged safety devices and machine

parts must be repaired or replaced by

a recognized service centre. Damaged

switches must be replaced by a service

centre. Do not use the machine when it

cannot be switched on or off.

Special safety instructions

In the design of the battery charger the

requirements for safe usage have been

taken into account. Any change, adaptation,

conversion or other use may interfere with

the safety of the apparatus. In addition, the

guarantee will no longer be valid because of

this.

• Checkthefollowingthings:

• Doesthevoltageofthebatterycharger

correspond to the mains voltage.

Battery chargers with the indication of

230 Volt can also be used when there is

a mains voltage of 220 Volt.

• Arethemainsleadandthemainsplug

in good condition.

• Avoidtheuseoflongextensioncablesfor

the battery charger.

• Donottrytoopenthehousingofthe

battery, because dangerous substances

may be released.

• Donotusethebatterychargerwherethere

is moisture.

• Donotexposethebattery(andthecharger)

to vivid sunlight and high temperatures.

• Duringchargingthebatteryacidmaystart

to boil, which is not unusual. Beware of

splashing, however, for battery acid is

caustic. The battery charger therefore

needs to be switched off in order to prevent

accidents and to allow the battery to cool

down.

• Duringchargingso-calleddetonatinggas

can be liberated. That is why the filler caps

areunscrewedbeforecharging(doesnot

apply to closed batterys, this means Battery

chargerswithoutfillercaps).Charginghas

to take place in a thoroughly ventilated

space.

• Thebatterychargerdoesnotstop

automatically after charging. For this

reason it needs to be switched off and

disconnected from the battery. Do not leave

the battery charger connected to the mains

voltage after the battery has been charged

completely.

• Thisrangeofdevicesisonlysuitablefor

accumulators containing lead and acid,

as specified in table 1, and are capable

of charging accumulators and starting

vehicles. These devices may not be used

for non-standard batteries and accessories.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BCM1017 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm BCM1017 Manual

Product: