Manual Ferm BCM1015 (page 5 of 36) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632765

Zoom out

Zoom in

1/36

Ferm 05

9. Maintain the tool with care.

• The tool works best and safest if it is kept clean.

• Observe the instructions for maintenance and changing accessories. Keep the tool

dry and free from oil and grease.

10. Disconnect the machine.

Disconnect the machine when you do not use it, before cleaning and when changing

accessories and tools.

11. Extension cable for outdoor use.

When working outdoors use only extension cables suitable for this purpose and marked as

such. When using machines with earth-connection, use an extension cable with earth-

connection.

12. Stay alert.

Watch what you are doing, use your common sense, do not operate the tool when you

cannot concentrate on the job.

13. Check the machine for damage.

• Before starting the machine, check that all safety devices and damaged parts operate

smoothly and efficiently;

• If not stated otherwise in this manual, damaged safety devices and machine parts

must be repaired or replaced by a recognized service centre. Damaged switches must

be replaced by a service centre. Do not use the machine when it cannot be switched on

or off.

Special safety instructions

In the design of the battery charger the requirements for safe usage have been taken into

account. Any change, adaptation, conversion or other use may interfere with the safety of the

apparatus. In addition, the guarantee will no longer be valid because of this.

• Check the following things:

• Does the voltage of the battery charger correspond to the mains voltage. Battery

chargers with the indication of 230 Volt can also be used when there is a mains voltage

of 220 Volt.

• Are the mains lead and the mains plug in good condition.

• Avoid the use of long extension cables for the battery charger.

• Do not try to open the housing of the battery, because dangerous substances may be

released.

• Do not use the battery charger where there is moisture.

• Do not expose the battery (and the charger) to vivid sunlight and high temperatures.

• During charging the battery acid may start to boil, which is not unusual. Beware of

splashing, however, for battery acid is caustic. The battery charger therefore needs to be

switched off in order to prevent accidents and to allow the battery to cool down.

• During charging so-called detonating gas can be liberated. That is why the filler caps are

unscrewed before charging(does not apply to closed batterys, this means Battery

chargers without filler caps). Charging has to take place in a thoroughly ventilated space.

• The battery charger does not stop automatically after charging. For this reason it needs to

be switched off and disconnected from the battery. Do not leave the battery charger

connected to the mains voltage after the battery has been charged completely.

68 Ferm

Garantibevis

Med hensyn til garantibetingelserne, refereres til garantibeviset, der følger separat med.

Vi erklærer herved, udelukkende på eget ansvar, at dette

BATTERIOPLADER 5A/12V

opfylder følgende standarder eller standardiserede dokumenter:

EN60335-1, EN60335-2-29, EN55014-1, EN55014-2, EN61000-3-2

i henhold til følgende direktiver:

73/23/EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC

frå 01-01-2007

ZWOLLE NL

J.A. Bakker - van Ingen J. Lodewijk

CEO Ferm BV Quality Manager Ferm Global

Vores firmapolitik bygger på løbende forbedring af vores produkter, og vi forbeholder os retten

til at ændre produktspecifikationer uden varsel.

Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland

KONFORMITETSERKLÆRING (DK)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BCM1015 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm BCM1015 Manual

Product: