762323

Ferm ATA1033 Manual

2
Zoom out
Zoom in
Previous page
1/8
Next page
2
EN-DE
HOSE REEL
1. INSTRUCTIONS
Mounting the hose reel
The most appropriate position is to mount it on a
wall horizontally, no more than 1 meter above the
ground. Mounting can be done by hanging it on
the hook and by using the bracket.
• Screw 2 holes in the wall. The distance
between the 2 holes should be 130mm.
• Use the 2 M8 screws with a washer to mount
the bracket to the wall.
Extracting the hose
• Pull the hose and stop when it reaches the
desired length. The maximum length is 9
meters.
Retracting the hose
• Extract the hose about 3-5 cm. The hose will
retract automatically.
• Hold the nozzle when the hose is retracting
and follow the retraction until it finishes.
• If the hose gets twisted, extract it fully and
retract it slowly to smoothen out the hose.
Connect the DIN coupling to a compressor. The
universal coupling can be used to connect to any
desired accessory (not included).
SCHLAUCHROLLE
1. ANWEISUNGEN
Montage der Schlauchrolle
Die beste Montageposition ist horizontal an der
Wand, höchstens 1 Meter über dem Boden. Die
Montage kann durch Aufhängen an dem Haken
und durch Verwendung der Halterung erfolgen.
• Bohren Sie 2 Löcher in die Wand. Der Abstand
zwischen den 2 Löchern muss 130mm
betragen.
• Befestigen Sie die Halterung mit den 2 M8-
Schrauben und einer Unterlegscheibe an der
Wand.
Abrollen des Schlauchs
• Ziehen Sie den Schlauch bis zur gewünschten
Länge. Die maximale Länge beträgt 9 Meter.
Aufrollen des Schlauchs
• Rollen Sie den Schlauch etwa 3-5 cm ab. Er
wird dann automatisch aufgerollt.
• Halten Sie die Düse fest, bis der Aufrollvorgang
abgeschlossen ist.
• Wenn sich der Schlauch verdreht, rollen Sie ihn
vollständig ab und dann langsam wieder auf,
damit er korrekt aufgerollt wird.
Verbinden Sie die DIN-Kupplung mit einem
Kompressor. Mit der Universalkupplung kann
beliebiges Zubehör angeschlossen werden (nicht
im Lieferumfang enthalten).
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm ATA1033 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm ATA1033 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info