Manual Ferm AGM1016 - FAG-115-500 (page 3 of 30) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763240

Zoom out

Zoom in

1/30

58 Ferm

SPARE PARTS LIST FAG-115/500

REF. NR DESCRIPTION FERM NR

6PINION GEAR 406058

11 ARMATURE 406059

18 SIDE HANDLE 406274

23 SPINDLE GEAR 406066

31 PROTECTING COVER 406718

33 FLANGE INSIDE 406846

35 FLANGE OUTSIDE 406847

37 STATOR 406060

39 CARBON BRUSH 406061

40 CARBON BRUSH HOLDER 406062

43 SWITCH 406063

45 SLIDE SWITCH KNOB 406064

48 SWITCH DRAW BAR 406065

55 WRENCH 406814

ANGLE GRINDER 115 MM

THE NUMBERS IN THE FOLLOWING TEXT COR-

RESPOND WITH THE PICTURES AT PAGE 2

TECHNICAL SPECIFICATIONS

PRODUCT INFORMATION

Fig.A

1. On/off switch

2. Guard

3. Side handle

4. Grinding disc

5. Spindle lock

PACKAGE CONTENTS

The package contains:

1Angle grinder

1Side handle

1 Spanner

1Set carbon brushes

1Instruction manual

1Safety instructions

1Guarantee card

Check the machine, loose parts and accessories for

transport damage.

SAFETY INSTRUCTIONS

The following symbols are used throughout this manual:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of the

instructions in this manual.

Denotes risk of electric shock.

Risk of fire.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions. Keep these

instructions in a safe place!

•Check that the maximum speed indicated on the

grinding disc corresponds to the maximum speed of

the machine. The speed of the machine must not

exceed the value on the grinding disc.

•Make sure that the dimensions of the grinding disc

correspond to the specifications of the machine.

•Make sure that the grinding disc has been mounted

and fastened properly. Do not use reducing rings or

adapters to make the grinding disc fit properly.

•Treat and store grinding discs in conformance with

the supplier’s instructions.

•Do not use the machine for grinding workpieces with

a maximum thickness exceeding the maximum grin-

ding depth of the grinding disc.

•Do not use grinding discs for deburring.

•When grinding discs have to be mounted on the

thread of the spindle, make sure that the spindle has

sufficient thread. Make sure that the spindle is suffi-

ciently protected and does not touch the grinding

surface.

•Before use, inspect the grinding disc for any damage.

Do not use grinding discs which are crack-ed, ripped

or otherwise damaged.

•Before use, let the machine run idle for 30 seconds.

Immediately switch off the machine in case of abnor-

mal vibrations or occurrence of another defect.

Carefully inspect the machine and grinding disc

before switching the machine on again.

•Make sure that sparks do not put people into danger

or that they contact highly flammable substances.

•Make sure that the workpiece is sufficiently suppor-

ted or clamped. Keep your hands away from the sur-

face to be cut.

•Always wear safety goggles and hearing protection. If

desired or required also use another kind of protec-

tion like for example an apron or helmet.

Voltage | 230 V

Frequency | 50 Hz

Power input | 500 W

No-load speed | 11000/min

Disc diameter | 115 mm

Spindle dimension | M14

Weight | 1.9 kg

Lpa (sound pressure) | 84.9 dB(A)

Lwa (acoustic power) | 97.9 dB(A)

Vibration value | 4.6 m/s2

Ferm 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm AGM1016 - FAG-115-500 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm AGM1016 - FAG-115-500 Manual

Product: