770216

Fenton 103.120 - AV344 Manual

4
Zoom out
Zoom in
Previous page
1/16
Next page
4
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
GENERAL
1. Power switch - Press the switch to turn the amplifier on/off.
2. USB port - Insert your USB devices into this slot.
3. Control buttons
Input - Press this button to switch between AUX, USB/SD and BT-input.
Previous - Track Skip to previous track.
Play / Pause - Start/resume or pause play by pressing this button.
Next - Skip to next track.
4. Microphone - Input 6.35mm (1/4”) jack input for microphone.
5. Microphone volume - Adjust the volume of the microphones.
6. Bass control - Adjust the bass.
7. Treble control - Adjust the treble
8. Volume control - Adjust the output level of amplifier.
9. Aux input - Connect any stereo signal such as a CD, TAPE, Mixer etc. to this input. To play a signal connected to this
input make sure the AUX input is selected on the front panel
10. Speaker output - Connect the speakers to these connectors
11. 12V Power - Input for power adapter 12V/5A, not supplied.
BT CONNECTION
First turn on the amplifier, press the “INPUT” button until BT LED lights up. Then use your mobile or other BT device and search
the amplifier. When you find “AV344” then connect, no password needed. The amplifier is only discoverable when input selected
BT.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fenton 103.120 - AV344 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fenton 103.120 - AV344 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 0.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info