770243
3
Zoom out
Zoom in
Previous page
1/16
Next page
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
OVERVIEW
1. Tone arm Lever
The fixed tonearm can be raised and lowered pressing the raise / lower lever.
2. Tone-arm Stand
3. 33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable platter.
4. Autostop Switch ON/OFF
This switch turns auto stop on or off. When the automatic stop is enabled, the platform will start rotating as soon as the
tone arm is placed over the record and will stop rotating when it has reached the end of the record. Some vinyl records
stop before the end or do not stop when the end is reached. In this case set Auto-stop to OFF.
5. Tone arm Clip
This specially designed arm clip secures the tonearm while at rest or when not in use.
6. Cartridge with needle
When the turntable is not in use, it is recommendable to place the removable protection cover on the stylus.
7. Volume control
Adjust the volume for the speakers.
8. LED Indicator
Indicator lights up when power turned on.
9. Function Mode
Select the BT or phono play function.
10. Platter
Place your record here.
11. 45RPM Platter
12. DC IN port
Connecting the 12Volt/DC power adaptor.
13. Line output
The audio from a playing vinyl record is sent to this line-level coaxial audio output. This must not be connected to
phono level devices.
OPERATION
1. Switch the function mode (9) to PH. Turn on the power switch at the rear of the turntable player. The indicator will
become red colour.
2. Place a record on the turntable platter and select the desired speed (33/45/78RPM) according to the record.
NOTE: when playing a 45RPM record, use the included 45RPM adapter located inside the
accessories bag.
3. Remove the stylus protector. Open the tone-arm clip to release the tone-arm. Push the lift lever
backward to raise the tone-arm and gently move the tone-arm to the desired position over the
record. The turntable will begin to spin when the arm is moved toward the record. Push the lift
lever forward to lower the tone-arm slowly onto the desired position on the record to begin playing
the record.
NOTE: -The record will begin to spin only when the tone-arm is moved toward the record if the Auto Stop is turned on.
- If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished (For some
few vinyl records, it will stop when it does not come to the end OR it will not stop when it comes to the end.). If
Auto Stop Control is turned OFF, record will NOT stop automatically when finished.
4. Turn the Volume Control Knob to adjust the volume.
CONNECT BT-DEVICE
1. Switch the function mode (9) to BT. The LED indicator will flash in blue colour.
2. Turn on the BT function of your mobile phone, tablet or other BT device and search the turntable
player with its name Fenton recordplayer.
3. After pairing and connection, the LED indicator will stop flashing. You can play your music from
your BT-device.
4. Turn the volume control knob to adjust the volume.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fenton 102.151 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fenton 102.151 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 0.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info