3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
OVERVIEW
1. Tuning knob
2. USB port
3. Standby indicator
4. Standby button
5. Function button
6. PREV button
7. NEXT button
8. PLAY/PAUSE button
9. STOP button
10. REC button
11. BT indicator
12. REC indicator
13. OPEN/CLOSE button
14. Volume control knob
15. Antenna
16. Headphone port
17. AUX IN socket
18. RCA output socket to connect external
speakers(with power amplifier built-in)
19. Power ON/OFF switch
20. DC IN jack
21. 45RPM adaptor
22. Turntable platter
23. Speed selector
24. Tonearm
25. AUTO STOP ON/OFF Switch
26. Tone Arm Lock
27. Cartridge/needle
LISTEN TO FM RADIO
• Press standby button [4] and the default mode is FM radio mode.
• Rotate the tuning knob [1] to search for the FM radio station manually.
• Press the button [8] for 2 seconds to search stations and save stations with name P01, P02, etc.
• Press buttons [6] [7] to switch between saved stations.
Recording
Plug in the USB drive to the USB port [2] at the front of the unit; press the REC button [10], the REC indicator [12] will light up
and the letters USB becomes flashing on the display and the radio program will be recorded into USB drive; press the STOP
button [9] to save the recorded file and stop recording.
PLAYING A CD
• Press the function button [5] to enter into the CD mode; press OPEN/CLOSE button [13] to open the disc tray, place
disc label side up on the tray, press OPEN/CLOSE button [13] to close the tray; the disc will start playing once loaded.
• To pause playback press the PLAY/PAUSE button [8], to continue playback press PLAY/PAUSE button [8] again.
• To stop playback press STOP button [9].
• To skip backwards through tracks, press PREV button [6] . To skip forwards through tracks press NEXT button [7] .
Recording
There are two ways to record CD via USB:
1. Recording of one track
• Press the REC button [10], the REC indicator [12] will light up, on the display, REC will appear and then ONE will
appear
• Press the REC button [10] to confirm the recording.
• Press the NEXT button [7] to select the song to be recorded.
• Press the REC button [10] to confirm the selection. The single song recording will automatically end up when that song
playback is finished. During recording, you can also press STOP button [9] to stop the recording.
2. Recording of all music tracks:
• Press the REC button [10], the REC indicator [12] will light up, on the display, REC will appear and then ONE will
appear.
• Press the NEXT button [7] and then ALL will appear on the display.
• Press the REC button [10] to start recording. During recording, you can also press STOP button [9] to stop the
recording.
