443068
5
Zoom out
Zoom in
Previous page
1/11
Next page
3. Next, place all knobs on your SFX Satellite at 1 or
their minimum positions.
4. Make sure the SFX On/Off button pressed in
(green light on) and the Bypass button in its out
position.
5. Play your guitar at your average volume through
your rig. At this point, no sound will emanate from
your SFX Satellite. Refer to the chart below to help
determine the SFX Satellite speaker operation modes
of your SFX Satellite and guitar amp.
6. Adjust the DSP Send knob on your SFX Satellite
so the “signal” light comes on.
7. Next, play at your hardest strength to ensure the
DSP “clip” light does not come on. If the DSP “clip”
light does come on, reduce the signal via the DSP
Send knob.
8. Set the DSP Return knob at 5. Next, adjust the
Output level knob on your SFX Satellite to a level
comparable to your guitar amp.
9. Push the Bypass switch in and out to match the
volume levels between your SFX Satellite and your
guitar amp by itself. The table below offers a few
suggestions on setting up the DSP Send and Output
Level adjustments. As a general rule of thumb, when
increasing your guitar amp volume it may be necessary
to decrease DSP send level on your SFX Satellite.
10. Adjust the DSP Return knob for the desired
effect level or “wetness”. Remember, extreme
adjustments to the DSP Receive knob will require an
adjustment of Output Level using the Bypass switch.
11. Finally, slowly rotate the SFX knob clockwise for
the desired spatial effect.
12. When shutting down your rig, turn off your guitar
amp first then your SFX Satellite.
SFX SATELLITE SET-UP PROCEDURE, CONTINUED
5
SFX DSP Send / Output Level Configurations
Amplifier
Guitar Amp
Volume
Output
Level
Hot Rod Deluxe 37
Deluxe 112
Vibro-King
DSP
Send
3
337
3102
Switch Control Table
SFX On/OffBypass Result
Button In
Button In
Button Out
Guitar Amp Only
-No Effects
Guitar Amp Only
-No Effects
SFX Effect Active
-Sound from Satellite
Guitar Amp w/ DSP Effects
-No Satellite Sound
Button Out
Button In
Button Out
Button In
Button Out
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Satellite SFX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Satellite SFX in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info