443092

Fender Princeton Sterio Chorus Manual

3
Zoom out
Zoom in
Previous page
1/7
Next page
PRINCETON CHORUS FRONT PANEL FUNCTIONS
A. INPUT 1-A high impedance, high sensitivity plug-in connection for instruments,
B. INPUT 2-Plug-in connection for instruments. This input exhibits a lower input impedance and sensitivity than INPUT 1
and is useful with active preamp guitars, and will provide a darker tone with passive guitars. Both inputs are identical when
used simultaneously.
C. VOLUME-Adjusts the overall loudness when not in the OVERDRIVE mode. (SEE: M. SELECT and S. FOOTSWITCH).
D. TREBLE-Adjusts the amount of boost (accentuation) or cut (attenuation) in the high frequency range.
E. MID-Adjusts the amount of boost or cut in the mid frequency range.
F. BASS-Adjusts the amount of boost or cut in the low frequency range.
G. REVERB-Adjusts the overall amount of reverberated signal mixed with the original dry signal.
H. GAIN-Adjusts the amount of preamp amplification while in the OVERDRIVE mode. Cleaner sound is achieved at lower gain
settings, high gain settings will produce more sustain and distortion. This control works in conjunction with the N.
OVERDRIVE-VOLUME control to set the overall loudness at the output.
I. MID-BOOST-Activates a special pre-emphasis filter which accentuates mid-range frequencies.
J. LIMITER-Adjusts the amount of compression at high GAIN settings. The compression is activated by distortion in
the preamp, therefore it is not as noticeable at low gain settings.
K. OVERDRIVE INDICATOR-This LED is illuminated when in the overdrive mode.
L. PRESENCE -Adjusts the amount of boost or cut in the upper high frequency range while in the OVERDRIVE mode. This
control occurs post preamp distortion and is useful in adjusting the distortion characteristic from brash, to smooth.
M. SELECT-Activates the OVERDRIVE Mode. NOTE: This switch disables the Channel Select Footswitch and the C.
VOLUME control.
N. VOLUME-Adjusts the overall loudness while in the OVERDRIVE mode.
O. RATE-Adjusts the sweep rate of the chorus generating circuitry. A lower number corresponds to a slower rate of sweep.
P. SELECT- Activates the stereo CHORUS mode. NOTE: This switch disables the Chorus Select Footswitch.
Q. DEPTH-Adjusts the intensity of the chorus effect. A lower setting will introduce a subtle yet distinct effect whereas a higher
setting will create a more dramatic effect. With both the 0. RATE and DEPTH controls set midway or higher, a variety of
vibrato/tremolo type effects can be achieved.
R. CHORUS INDICATOR-This LED is illuminated when the stereo chorus is active. The intensity of the LED is modulated
by the chorus sweep LFO to give a visual indication of the sweep rate.
S. FOOTSWITCH- Plug-in connection for remote footswitch to activate the OVERDRIVE mode and to switch the stereo
CHORUS on and off. For proper operation of the footswitch, both M. OVERDRIVE SELECT and P. CHORUS SELECT
switches should be out. NOTE: Any good quality patch cord will work with the remote footswitch, however a
speaker grade cord is preferable to a coax guitar cord when it’s available.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Princeton Sterio Chorus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Princeton Sterio Chorus in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info