Manual Fender Princeton Recording-Amp (page 7 of 28) (English)

443017

Zoom out

Zoom in

1/28

◊

Rear Panel

Trans-Impedance Power Attenuator

K. OVERDRIVE ONOFFPress IN to engage the Overdrive

circuit as indicated by the LED. See FOOTSWITCH {Z}.

OVERDRIVE Off OVERDRIVE On

L. OVERDRIVEAdjusts the amount of signal distortion

provided by the Overdrive effect.

M. TONEAdjusts the Overdrive tone characteristics.

N. LEVELAdjusts the Overdrive volume output, useful for

boosting gain to generate additional tube distortion.

O. TRANSIMPEDANCE POWER ATTENUATORWhen

set to FULL VOLUME, the attenuator circuit is bypassed

allowing the maximum output from the tube ampli-

fier. When set to SILENT, the speaker is disabled, but

HEADPHONE and LINE OUT outputs may be used. At

any setting beside FULL VOLUME (including SILENT) the

power attenuation circuit controls the output loudness

of the speaker, while preserving the tube amp + speaker

“feel” and dynamics achieved through amplifier volume

and playing intensity.

(US PATENT # 6,816,009)

P. FUSE

Protects the amplifier from electrical faults. Only

replace a blown fuse with the type and rating specified

on the rear panel of your amplifier.

Q. IEC POWER INPUT SOCKETConnect to a grounded

outlet using the supplied power cord in accordance with

the voltage and frequency ratings specified on the rear

panel of your amplifier.

R. POWERTurns the Princeton Recording-Amp ON-OFF.

S. SPEAKER OUTPUTConnection for the speaker.

CAUTION: An Ω speaker must ALWAYS be connected when

the amplifier is ON or damage may occur.

T. HEADPHONE / A speaker-emulated

output for use with standard Stereo or Mono head-

phones. Accepts a standard /" plug.

U. LINE OUTA studio-quality, speaker emulated, balanced

XLR output suitable for recording or sound reinforcement

applications.

V. LINE LEVEL

Adjusts the output level of the LINE OUT

{U} jack. Use to accommodate the input sensitivity of

your connected equipment.

W. GROUND LIFT Press IN to disconnect the LINE

OUT {U} ground pin () to reduce noise caused by non-

standard wiring. Leave OUT for normal operation.

X/Y

. SEND / RECEIVEEffects loop jacks. Connect SEND {X}

to your effects input and RETURN {Y} to effects output.

Set your effects device level control (if any) as close to

–dBu as possible.

Z. FOOTSWITCHConnect the included -but-

ton footswitch using the supplied -pin DIN cable to

enable remote on-off switching of: OVERDRIVE {K},

COMPRESSOR {H}, FX LOOP {X,Y} and REVERB {F}.

NOTE: The footswitch buttons override the corresponding

panel controls.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fender Princeton Recording-Amp in the language / languages: English as an attachment in your email.

The manual is 16,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fender Princeton Recording-Amp Manual

Product: