443100
3
Zoom out
Zoom in
Previous page
1/4
Next page
Champion 110 Front Panel Functions
A. INPUT - A high impedance, high sensitivity plug-in
connection for instruments.
B. VOLUME - Adjusts the overall loudness of the Normal
Channel.
C. GAIN - Adjusts the amount of preamp amplification in the
Drive Channel. Cleaner sound is achieved at lower gain
settings; high gain settings will produce more sustain and
distortion. This control works in conjunction with the DRIVE
VOLUME control (item E) to set the overall loudness of the
Drive Channel.
D. GAIN SELECT - Activates the Drive Channel. NOTE: This
switch disables the optional Channel Select Footswitch and
the Normal Channel VOLUME control (item B).
E. VOLUME - Adjusts the overall loudness of the Drive
Channel.
F. DRIVE CHANNEL - INDICATOR -This LED is illuminated
when the Drive Channel is active.
G. TREBLE - Adjusts the amount of boost or cut in the high
frequency range.
H . MID - Adjusts the overall tone quality without affecting the
signal level. High MID settings will provide emphasis in the
midrange frequencies whereas a lower setting will notch the
midrange to produce sounds characteristic of most “metal”
music.
I. BASS - Adjusts the amount of boost or cut in the low
frequency range.
J. REVERB - Adjusts the amount of reverberated signal mixed
with the original dry signal for both the Normal and Drive
channels.
K. FOOTSWITCH - Plug-in connection for optional remote
footswitch to switch between the Normal and Drive channels.
For proper operation of the footswitch, the GAIN SELECT
switch (item D) should be out. NOTE: Any good quality patch
cable will work with the remote footswitch; however, a
speaker grade cord is preferable to a coax guitar cable if it is
available.
L. EXTERNAL SPEAKER - This jack provides an output to an
external speaker enclosure. The enclosure must have a
minimum impedance of 8. Use of this jack automatically
disables the internal speaker.
M. HEADPHONES - This jack provides an output to standard
stereo or mono headphones for private listening. NOTE: Use
of this jack automatically disables the speaker. CAUTION:
Prolonged listening at high levels may be hazardous to your
hearing! This jack can also be used as an unbalanced line
output by using either a stereo or mono 1/4 inch phone plug
connection.
N. POWER INDICATOR - When this indicator is illuminated the
CHAMPION I 10 is receiving AC power.
0. POWER SWITCH - This switch turns the AC power ON and
OFF. When the switch is OFF the amplifier is completely shut
down.
LINE CORD - This amplifier is equipped with a grounding
type supply cord to reduce the possibility of shock hazard. Be
sure to connect it to a grounded receptacle. DO NOT ALTER
THE AC PLUG.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Champion 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Champion 110 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info