443054
3
Zoom out
Zoom in
Previous page
1/4
Next page
Bullet / Bullet Reverb Front Panel Functions
A. INPUT - A high impedance, high sensitivity plug-in
connection for instruments.
B. NORMAL VOLUME - Adjusts the overall loudness of the
Normal Channel.
C. GAIN - Adjusts the amount of preamp amplification in
the Drive Channel. Cleaner sound is achieved at lower
gain settings; high gain settings will produce more
sustain and distortion. This control works in conjunction
with the
DRIVE VOLUME
control (item E) to set the overall
loudness of the Drive Channel.
D. DRIVE SELECT - Activates the Drive Channel.
E. DRIVE VOLUME - Adjusts the overall loudness of the
Drive Channel.
F. TREBLE - Adjusts the amount of boost or cut in the high
frequency range.
G. MID - Adjusts the overall tone quality without affecting
the signal level. High MID settings will provide emphasis
in the midrange frequencies whereas a lower setting will
notch the midrange to produce sounds characteristic of
most “metal” music.
H. BASS - Adjusts the amount of boost or cut in the low
frequency range.
I. REVERB - ( BULLET REVERB ONLY.) Adjusts the amount
of reverberated signal mixed with the original dry
signal for both the Normal and Drive channels.
J. EXTERNAL SPEAKER - This jack provides an output to
an external speaker enclosure. The enclosure must
have a minimum impedance of 8 Use of this jack
automatically disables the internal speaker.
DO NOT
PLUG HEAD PHONES IN HERE.
K. HEADPHONES - This jack provides an output to
standard stereo or mono headphones for private
listening. NOTE: Use of this jack automatically disables
the speaker. CAUTION: Prolonged listening at high
levels may be hazardous to your hearing! This jack can
also be used as an unbalanced line output by using
either a stereo or mono 1/4 inch phone plug
connection.
L. POWER INDICATOR - When this indicator is
illuminated the Bullet / Bullet Reverb is receiving AC
power.
M. POWER SWITCH - This switch turns the AC power ON
and
OFF.
When the switch is
OFF
the amplifier is
completely shut down.
LINE CORD - This amplifier is equipped with a grounding
type supply cord to reduce the possibility of shock hazard.
Be sure to connect it to a grounded receptacle.
DO NOT
ALTER THE AC PLUG.
A B
C
D E F
G
H
I
J
K
L
M
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Bullet PR 241 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Bullet PR 241 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info