443080
5
Zoom out
Zoom in
Previous page
1/8
Next page
L. TREBLE - Adjusts the amount of high frequency boost or cut in the
DRIVE
channel. This control is post distortion and
is useful in adjusting the distortion characteristic from smooth to brash.
M. BASS - Adjusts the amount of low frequency boost or cut in the
DRIVE
channel. This control is post distortion and is
useful for adjusting the amount of “thump” or “chunk” produced by the
DRIVE
channel.
N. DRIVE SELECT - When this button is depressed, the amp switches from the
NORMAL
channel to the
DRIVE
channel. NOTE: Depressing this switch disables the CHANNEL SELECT footswitch button.
O. VOLUME - Adjusts the overall volume of the
DRIVE
channel.
P. REVERB - Adjusts the amount of reverb present in both the
NORMAL
and
DRIVE
channels.
Q. FOOTSWITCH - Plug-in connection for a remote footswitch to switch between the
NORMAL
and
DRIVE
channels
and to turn the REVERB on and off. NOTE: Any good quality patch cord will work with the remote footswitch;
however, a speaker grade cord is preferable to a coax guitar cord when it’s available.
R. PREAMP OUT - This jack provides an unbalanced output signal from the preamp. This jack can be used with the
POWER AMP IN jack (item S) as a patch point for effects.
S. POWER AMP IN - This jack provides an input directly to the power amp. It automatically disconnects the preamp
signal when used. This is useful when using effects, or when the STAGE 112SE is used as a slave amplifier.
T. LINE OUT - This jack provides an output signal taken directly off the amplifier output and speaker. Using a stereo
cord in this jack will provide a quasi-balanced signal. A mono cord will provide an unbalanced signal.
U. POWER SWITCH - Turns the AC power on and off. When the switch is in the off position, the amplifier is completely
shut down.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Atage 112 SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Atage 112 SE in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info