443074
5
Zoom out
Zoom in
Previous page
1/16
Next page
Stage 100 (combo) Stage 160 (combo) Stage 100H (head only)
TYPE: PR 401 PR 400 PR 453
PART NUMBER: 22-6700 (120V, 60Hz) US 22-6800 (120V, 60Hz) US 22-6900 (120V, 60Hz) US
22-6730 (240V, 50Hz) Aust 22-6830 (240V, 50Hz) Aust 22-6930 (240V, 50Hz) Aust
22-6740 (230V, 50Hz) UK 22-6840 (230V, 50Hz) UK 22-6940 (230V, 50Hz) UK
22-6760 (230V, 50Hz) Eur 22-6860 (230V, 50Hz) Eur 22-6960 (230V, 50Hz) Eur
22-6770 (100V, 50/60Hz) Jpn 22-6870 (100V, 50/60Hz) Jpn 22-6970 (100V, 50/60Hz) Jpn
POWER REQUIREMENTS: 400W 400W 400W
POWER OUTPUT: 100W RMS into 8 @ 5%THD 160W RMS into 4 @ 5%THD 100W RMS into 8 @ 5%THD
(WITH EXTENSION SPEAKER): 160W RMS into 4 @ 5%THD N/A 160W RMS into 4 @ 5%THD
INPUT IMPEDANCE: INPUT 1: 850k, INPUT 2: 66k INPUT1: 850k, INPUT 2: 66k INPUT1: 850k, INPUT 2: 66k
FX SEND OUTPUTIMPEDANCE: 1k 1k 1k
FX RETURN INPUT IMPEDANCE: 10k 10k 10k
POWER AMPIN SENSITIVITY: 810mV for 160W into 4 @1kHz 810mV for 160W into 4 @1kHz 810mV for 160W into 4 @1kHz
620mV for 100W into 8 @1kHz N/A 620mV for 100W into 8 @1kHz
FUSE: 4A125V for 100V / 120V ver 4A125V for 100V /120V ver 4A125V for 100V /120V ver
2A250V for 230V / 240V ver 2A250V for 230V / 240V ver 2A250V for 230V / 240V ver
FOOTSWITCH: 2 Button - (P/N 050419) 2 Button - (P/N 050419) 2 Button - (P/N 050419)
Normal/Drive, Drive/More Drive Normal/Drive, Drive/More Drive Normal/Drive, Drive/More Drive
SPEAKER COMPLIMENT: One 8 Celestion G12T-100 Two 8 Celestion G12T-100 N/A
12” speaker (P/N 054420) 12” speakers (P/N 054420)
DIMENSIONS: HEIGHT: 17.5 in. (45 cm) 18.5 in. (47 cm) 8.5 in. (22 cm)
WIDTH: 22.4 in. (57 cm) 26.1 in. (66 cm) 22.4 in. (57 cm)
DEPTH: 10.2 in. (26 cm) 10.3 in. (26 cm) 9.5 in. (24 cm)
WEIGHT: 42 lbs. (19.1 kg) 53 lbs. (24.1kg) 24 lbs. (10.9 kg)
Product specifications are subject to change without notice.
5
1 . POWER SWITCH - Tu r ns the AC power ON and OFF.
2. LINE CORD - This amplifier is equipped with an
IEC grounding type supply cord to reduce the
possibility of shock hazard. Be sure to connect it
to a grounded AC receptacle in accordance with
the voltage and frequency ratings listed on the
rear panel under INPUT POWER.
NOTE: Items 3 and 4 apply only to the
Stage 100H.
3. SPEAKER OUTPUT (8 minimum) - Use this out-
put jack when only one 8 speaker enclosure is to
be connected to the Stage 100H. If two 8
speaker enclosures are to be connected, use both
parallel speaker output jacks (total load of 4).
4 . SPEAKER OUTPUT (4 minimum) - Use this output
jack when o n e 4 speaker enclosure is to be con-
nected to the Stage 100H. (Using this jack inter-
nally switches the Stage 100H to accept a 4 load.)
NOTE: Item 5 applies only to the Stage 100.
5. EXTERNAL SPEAKER (8 minimum) - Use this
output jack when one 8 speaker enclosure is to
be connected to the Stage 100 for additional out-
put. The Stage 100’s internal speaker must be
connected while using this jack.
6. LINE OUT - This balanced XLR line-level output is
designed for connection to an external power
amplifier or main house mixer. The signal from
this output jack includes all tone shaping done by
the amplifier.
7. RETURN - This 1/4 inch, unbalanced, TS, line-
level input jack is designed to accept a signal
from external effects devices or another amplifier
in a “daisy-chain” configuration.
8. SEND - This 1/4 inch, unbalanced, TS, line-level
output jack is designed to feed the preamp signal
to external effects devices or to an “add-on”
amplifier in a daisy-chain configuration.
9 . FOOTSWITCH - Connect the footswitch at this jack.
The two-button footswitch enables switching
between Normal and Drive channels and ON/OFF
switching of the MORE DRIVE p r e-amplifier boost.
Using this jack disables these switching functions
f r om the front panel. NOTE: Connecting the
footswitch with an unshielded speaker type cord is
p referable to using a shielded coaxial guitar cord .
R
R
e
e
a
a
r
r
P
P
a
a
n
n
e
e
l
l
F
F
u
u
n
n
c
c
t
t
i
i
o
o
n
n
s
s
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
STAGE 100H
SPEAKER
JACKS
STAGE 100
SPEAKER
JACK
1
2
5
6 7 8
9
3 4
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender 160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender 160 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info