502530
2
Zoom out
Zoom in
Previous page
1/112
Next page
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS Please Read Before Using!
• The socket-outlet shall be installed near the equipment and
shall be easily accessible.
To prevent electrical shock, do NOT use laminator close to
water and do NOT spill water on laminator, electric cord, or
wall socket.
Do not leave electric cord in contact with a warm surface.
Do not leave electric cord hanging from a cupboard or shelf.
Do not use laminator if electric cord is damaged.
Do not laminate metal objects.
Only use pouches specically designed for the lamination setting you intend to use.
Always supervise children during laminator operation.
• Keep pets away from laminator while in use.
Switch off and unplug laminator when not in use.
Only open the laminator as explained under “Maintenance”. Do not open or attempt
to repair in any other way, as this could result in electric shock and will void your
warranty. Contact Customer Service if you have questions. Please note the warranty
does not apply in cases of abuse, mishandling or unauthorized repair.
Please be careful of sharp edges and corners and residual heat when opening
the laminator.
2
Discrete carry
handles at side
Active Cooling System
Temperature controlled
release trigger for lid
Support Shelf on entry to
guide Laminate path
LCD Interface for
user guidance
HeatGuard Technology™ double-walled
insulation keeps heat inside
Opening lid to clean
laminating mechanism
CAPABILITIES
Pouch Thickness 75-250 microns
Estimated Heat-Up Time 4 Minutes
Approximate Cool-Down Time 60 Minutes
Lamination Speed 50 cm/Minute
Maximum Width 330 mm
Voltage 220 - 240V~
Frequency 50/60 Hz
Laminating capacity – 75 to 250 micron hot laminating pouches per side
(min: 2 x 75 = 150 micron; max: 2 x 250 micron = 500 micron pouches)
Up to A3 width (330mm)
1000 Watt
Dimensions: 555mm (w) 245mm (d) 120mm (h)
Max document thickness 1mm
IMPORTANT SAFETY INFORMATION
This laminator is equipped with an Auto shut-
off function. It will turn the laminator into
stand-by mode, if it has not been used for
over 60 minutes. The LCD screen will show
the sleep screen when in stand-by.
COLD
80
mic
10 0
mic
250
mic
HELP? TEMP
17 5
mic
12 5
mic
To switch the laminator back on, simply press the
stand-by button at the left of the front operating
panel.
During lamination, the direction of the pouch can be
reversed, if you are unsure about the progress of the
lamination. To do so, press down the reverse key.
This will eject the pouch back at the front entry.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fellowes Venus laminator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fellowes Venus laminator in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 28,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info