502533
108
Zoom out
Zoom in
Previous page
1/112
Next page
Ligue o aparelho (interruptor de alimentação situado
na parte de trás do aparelho).
Seleccione o botão “Standby” no painel de controlo.
Verifique se os comandos LED acendem. Os LED "75
mícrones" e "pronto" ficam intermitentes durante 5
segundos antes de seleccionar automaticamente a
definição de aquecimento de 75 mícrones. É possível
seleccionar qualquer definição em qualquer momento,
conforme necessário. Para abrir a máquina, é normal a
máquina arrefecer antes de abrir.
A interface LED permite escolher estas funções:
- Definições de bolsa de 75,100,125,175,250 mícrones
- Laminação manual
- Para trás
- Fácil acesso para prestar assistência ao mecanismo
O laminador selecciona automaticamente a definição de
bolsa mais fina (75 mícrones) no período de 5 segundos
depois de ligar a menos que se seleccione outra
definição. Durante o aquecimento ou o arrefecimento,
a definição de bolsa seleccionada ficará intermitente a
vermelho.
Quando o laminador atingir a definição escolhida, o
LED pára de piscar e fica aceso a vermelho. A máquina
emite 2 alertas breves.
Coloque o artigo na bolsa aberta. Certifique-se de que
o artigo está centrado na extremidade dianteira selada.
Utilize o tamanho de bolsa adequado para o artigo.
Coloque a bolsa, com a extremidade selada primeiro
na entrada documentos. Mantenha a bolsa direita e
centrada com a entrada de documentos, não enviesada.
Oriente-se utilizando as marcas da entrada.
Quando sair, a bolsa laminada apresentar-se-á quente
e macia. Tenha cuidado e remova a bolsa imediata-
mente. Coloque a bolsa numa superfície plana para ar-
refecer. Isto ajuda a impedir quaisquer encravamentos.
Para inverter o processo de laminação em qualquer
momento, prima e mantenha premido o botão
“Reverse” (Inverter) para ejectar o artigo. O laminador
emitirá alertas continuamente e o LED "pronto" fica
intermitente.
5.
6.
7.
8.
9.
PASSOS PARA LAMINAR
108
Permita que os nossos especialistas o ajudem a encontrar uma
solução.
Apoio ao Consumidor:
www.fellowes.com
Linha de Apoio Europa: 00-800-1810-1810
NECESSITA DE AJUDA?
Certifique-se de que o aparelho se encontra numa
superfície estável Verifique se existe espaço suficiente
(mín. 50cm) na traseira da máquina para permitir que
os artigos passem sem obstrução.
Seleccione o cabo de alimentação correcto para a fonte
de alimentação adequada. Ligue o cabo ao aparelho (a
tomada situa-se na parte de trás).
Ligue o aparelho a uma tomada de parede de fácil
acesso. Ligue a alimentação.
Para suportar totalmente bolsas e artigos de tamanhos
diferentes, utilize o guia de entrada ajustável para
centrar o artigo antes de laminar. Coloque a bandeja
de saída na parte de trás da máquina.
1.
2.
3.
4.
PREPARAÇÃO DO LAMINADOR
10.
11.
12.
404415_2_EUR_Titan_All_v3.0.indd 108 25/09/2009 09:25:06
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fellowes Titan laminator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fellowes Titan laminator in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 27,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info