Manual Fellowes Proteus laminator (page 5 of 24) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

502531

Zoom out

Zoom in

1/24

LED & STATUS DISPLAY

Select “UP” or “DOWN” controls to adjust the

roller laminating temperature.

Manually adjust the roller temperatures to

suit the thickness of laminating stock.

Select function to laminate with ‘MOUNT BOARD’.

A function for laminating hard board more than 1mm

thickness. The function selects temperature 130°c and

motor speed “1”.

Select function to ‘MEASURE’ the actual

temperature of rollers.

The button can be pressed anytime for an im-

mediate read out in the temperature display.

Select function for ‘COLD’ or no-heat lamination.

Cold lamination automatically selects temperature and

motor speed of “0”. If roller temperature is above 60°c,

motor speed of “2” will operate until rollers have cooled

safely. This action will prevent heat damage to the

rollers.

Select function for laminating with ‘CARRIER’.

The function for laminating pouches with

Carriers. The function selects 100°c and motor

speed “2”.

Select function for ‘PRE-HEAT’ .

Pre-Heat can be selected as a ‘Stand-By’ function ideal

for extended periods of use. The function operates at

80°c and motor speed “2”, until another function is

selected.

Select function for ‘HOT’ lamination. Hot lamination for normal hot pouch films. For 80mic pouch, the machine will select

temperature of 90°c and motor speed of “5”. This is ideal for 80g copy paper and 80mic pouch. For thicker pouches, select the

corresponding engine speed followed by temperature adjustment. Adjustment to temperature using “UP” and “DN” buttons to

suit the thickness of paper as required.

EG:

250 micron = motor speed 2

200 micron = motor speed 3

175 micron = motor speed 3

150 micron = motor speed 3

125 micron = motor speed 5

100 micron = motor speed 5

80 micron = motor speed 5

Indicates roller temperature (pre-set and actual).

“READY” LED switches to show the roller temperature is

ready to laminate.

Indicates running speed of the rollers.

Function LED displays showing the selected function in

operation.

TEMPERATURE ADJUSTMENT & FUNCTION CONTROLS

SPEED & MOTOR CONTROLS

“STOP” function.

Press and hold to stop the rollers running. Do

not use for long periods especially when the

roller temperature is above 90°c.

“Reverse” function.

Press and hold to reverse the rollers. This will help

remove mis-fed pouches.

Select the motor speed to suit the chosen pouch thickness. Then adjust temperature to suit paper thickness if required.

EG:

motor speed 1 = mounting board

motor speed 2 = 250 micron & carriers

motor speed 3 = 200, 175, 150 micron

motor speed 5 = 125, 100, 80 micron

405600_EUR_Proteus_All_v1.5.indd 5 12/23/2010 1:50:33 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fellowes Proteus laminator in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fellowes Proteus laminator Manual

Product: