Manual Fellowes Mars laminator (page 3 of 40) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

502523

Zoom out

Zoom in

1/40

TROUBLESHOOTING

WARRANTY

Fellowes warrants all parts of the laminator to be free of defects in mate-

rial and workmanship for 1 year from the date of purchase by the original

consumer. If any part is found to be defective during the warranty period, your

sole and exclusive remedy will be repair or replacement, at Fellowes’ option

and expense, of the defective part. This warranty does not apply in cases of

abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY, INCLUD-

ING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

IS HEREBY LIMITED IN DURATION

TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. IN NO EVENT

SHALL FELLOWES BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL

DAMAGES ATTRIBUTABLE TO THIS PRODUCT. This warranty gives you specic

legal rights. You may have other legal rights that vary from this warranty. The

duration, terms and conditions of this warranty are valid world-wide, except

where different limitations, restrictions or conditions may be required by local

law. For more details or to obtain services under this warranty, please contact

us or your dealer.

Problem

Ready Light does not go on after

extended time.

Pouch did not completely adhere

to item.

Jamming

Cause

Laminator is in a hot, humid area.

Laminated item may be too thick.

Pouch was not used.

Pouch was not centered or straight when fed

through Pouch/Document Entry.

Solution

Move laminator to a cool dry area.

Pass through laminator a second time.

Always put item in a pouch.

Align sealed edge with Pouch/Document Entry.

Use guide to center.

Need Help?

Please call our experts at Customer

Service. You’ll nd the numbers for

your nearest Service Centre on the

cover of this booklet.

LAMINATION STEPS

• Plug laminator into

power outlet.

• Position lamina-

tor so you have

enough space to

allow items to pass

freely through the

machine.

Slide power button to

right and wait for green

Ready Light.

Place pouch, sealed edge

ﬁrst, into laminator entry.

Keep pouch straight and

use the edge guide to

center it.

To prevent jamming,

immediately remove

laminated item from back

of machine. Let item cool

on ﬂat surface for several

seconds.

Before switching off lami-

nator, feed empty cleaning

& support sheet through

machine to clean unit.

Use Fellowes

brand pouches

for best

results. Select

correct pouch

size for lami-

nated item.

Place item inside pouch

against the sealed edge.

To prevent jamming, use

a carrier when item is

smaller than the pouch.

BEFORE YOU LAMINATE

2 3 4 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fellowes Mars laminator in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fellowes Mars laminator Manual

Product: