Manual Fellowes Galaxy 500 (page 5 of 74) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

502653

Zoom out

Zoom in

1/74

CORRECTING A BOUND DOCUMENT

REMOVAL OF WASTE CLIPPINGS

WORLDWIDE WARRANTY

Fellowes warrants all parts of the binder to be free of defects in material and workmanship

for 2 years from the date of purchase by the original consumer. If any part is found to be

defective during warranty period, your sale and exclusive remedy will be repair or replacement,

at Fellowes’ option and expense, of the defective part. This warranty does not apply in

cases of abuse, mishandling or unauthorised repair. Any implied warranty, including that of

merchantability or ﬁtness for particular purpose, is hereby limited in duration to the appropriate

warranty period set forth above. In no event shall Fellowes be liable for any consequential

damages attributable to this product. This warranty gives you speciﬁc legal rights. You may

have other legal rights that vary from this warranty. The duration, terms and conditions of this

warranty are valid worldwide, except where different limitations, restrictions or conditions may

be required by local law. For more details or to obtain services under this warranty, please

contact Fellowes or your dealer.

TROUBLESHOOTING

Additional sheets may be included or removed at any time by opening and then closing the comb as previously described.

The waste tray is located under the machine and is accessed from each side. For best results empty the tray regularly.

The tray should be emptied after every 50 operations to ensure no blockages occur.

STORAGE

Lower the lid and punch handle. The Galaxy comb binder is designed to be stored horizontally on the desk.

Problem Cause Solution

Punched holes are not central Edge guide not set Adjust edge guide until hole pattern is correct

Machine will not punch Blockage Check waste tray in empty. Check for blockage to paper entry

Punch holes are not parallel to edge Debris is stuck below dies Take stiff cardboard and slide into the paper entry. Move the

cardboard sideways to release any stray clippings into the

waste tray

Partial holes Sheets not correctly aligned to punch pattern Adjust edge guide and test punch scrap sheets until correct

Missing holes Selectable dies are not selected to punch Check the correct dies are selected to punch holes. To select a

die, push selector switch down at the front

Sheets will not turn on the

bound document

Back margin is too large for a smaller comb Select the smaller margin depth for combs up to 18mm (

/16

”)

in diameter (2-150 sheets) Select the larger margin depth for

combs larger than 18mm (

/16

”) in diameter (151-500 sheets)

Damaged hole edges Possibly overloading the machine Punch plastic covers with paper sheets. Reduce number of

sheets being punched

Waste tray leaks Waste tray is not correctly inserted or ‘burst

feature’ has activated

Check waste tray is empty and ‘burst feature’ is closed

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fellowes Galaxy 500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fellowes Galaxy 500 Manual

Product: