Manual Felisatti SG6 (page 3 of 36) (English, German, French, Italian, Portuguese, Turkish, Spanish, Finnish)

502485

Zoom out

Zoom in

1/36

TECHNICAL DATA

Straight grinder SG6/750 SG6/1000CE

Input power W 750 1000

No-load speed r.p.m. 27000 12000-27000

Maximum diameter of grinding wheel/disc mm 25 25

Clip diameter mm 6 6

pprox. weight (without acces.) Kg. 1.4 1.5

The instructions contained in this manual must be strictly

followed, it should be carefully read and kept close at

hand to use when carrying out maintenance on the

indicated parts.

If the machine is used carefully and normal maintenance

is carried out, it will work well for a long time.

The functions and use of the tool you have bought shall

be only those described in this manual. Any other use

of the tool is strictly forbidden.

ILLUSTRATIONS

DESCRIPTION (See figures)

A Start-up switch (Fig.1)

B Clamping nut (Fig.1)

C Speed adjustment (Fig.1) (Mod. SG6/1000CE)

EQUIPMENT

- Clip, ∅6 mm

- Fixed spanner 13 mm

- Fixed spanner 17 mm

- Operating instructions

- Safety instructions

- Warranty

SAFETY INSTRUCTIONS

• See “Safety Instructions” manual, supplied with this

instruction manual.

• WARNING! Do not grind material containing amian-

thus. Working with materials containing amian-

thus/asbestos and/or silica stones produces a dust,

which is harmful to health. Protect yourself from inha-

ling this dust, in compliance with current regulations on

accident prevention.

• For your personal safety, always connect the machine

to a mains supply protected by a differential and ther-

mal cutout switch, in accordance with regulations on

low-voltage wiring sitemaps.

• Do not pierce the motor housing as this could damage

the double insulation (use adhesive labels).

• Check the work area with a metal detector for hidden

wires, gas and/or water pipes.

• Always unplug the machine before carrying out work

on it.

• Always stop the machine by switching it off, not by

unplugging it.

• WARNING! Before each use, inspect the plug and

lead. Should they need replacing, have this done by an

official service centre.

• Always keep the mains lead clear of the working range

of the machine.

• Only plug the machine in when it is switched off.

• Hold the machine firmly in both hands and in a stable

position.

• Verify that the speed marked on the grinding disc or

wheel is equal to or higher than the straight grinder

rated speed.

• Ensure that the grinding disc or wheel dimensions are

compatible with the straight grinder.

• Abrasive grinding wheels or discs must be handled

and stored with care in accordance with the manufac-

turer’s instructions.

• Protect the sanding tool from knocks, blows and grease.

• The grinding disc or wheel must be carefully checked

before being used to ensure that it is not damaged or

cracked. All damaged or cracked grinding discs or

wheels must be immediately replaced.

• All grinding discs and wheels must be carefully moun-

ted in accordance with the manufacturer’s instructions.

• The machine should be used for dry cutting and grin-

ding only.

• Check that the disc has been properly fitted and secu-

red before using the machine. Start the machine with

no load and run for 30 seconds in a safe position; if

you notice serious vibration or any other defect stop

the machine immediately. This may be a sign of incor-

rect fitting or a badly balanced disc.

• Ensure that the part to be worked on is firmly secured

before beginning any grinding or cutting operation.

• Never use cutting discs for deburring. Do not subject

cutting discs to lateral pressure.

• Beware of shavings that fly off. Hold the tool that so

that sparks fly away from you or other people and in-

flammable materials.

• When working on stone, use dust extraction equipment

and wear a mask.

• When working with the machine, always wear safety

goggles and ear protection. Other personal protection

equipment such as dust masks, gloves, helmet and

apron should be worn when necessary, along with non-

slip safety footwear. A dust mask is required when the

dust from the material deburred, such as paint or other

coating, is harmful. If in doubt, use safety equipment.

• Make sure the vents are free when working with dust. If

they require cleaning, first unplug the machine, do not

use metal objects and avoid damaging internal parts.

• Do not touch the sanding/grinding tools when rotating.

• WARNING! The wheel keeps moving for a long time

after the machine has been switched off.

BRIEF DESCRIPTION

This straight grinder has been designed to dock, rough

grind or plane metal and stone materials without the

need for a water supply.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti SG6 in the language / languages: English, German, French, Italian, Portuguese, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 2,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Felisatti SG6 Manual

Product: