Manual Felisatti RF62 (page 4 of 33) (English, German, French, Italian, Portuguese, Spanish)

502510

Zoom out

Zoom in

1/33

TECHNICAL DATA

Milling machine RF62/1500VE

bsorbed powe

W 1500

No load speed rpm 12000-23000

 of milling cutter attachment

mm 12

 maximum of milling cutter

mm 60

Machine weight (without accessories) kg 2.450

The instructions contained in this manual must be strictly

followed, it should be carefully read and kept close at

hand to use when carrying out maintenance on the

indicated parts.

If the machine is used carefully and normal maintenance

is carried out, it will work for a long time.

The functions and use of the tool you have bought shall

be only those described in this manual. Any other use

of the tool is strictly forbidden.

ILUSTRATIONS

DESCRIPTION (See figures)

A Micro-adjustment disc (Fig.1)

B Micro-adjustment knob (Fig.1)

C Speed adjustment (Fig.1)

D ON/OFF switch (Fig.1)

E Grips (Fig.1)

F Clip-carrier shaft (Fig.1)

G Clip fixing nut (Fig.1)

H Fixed base (Fig.1)

I 22 mm spanner (Fig.1)

J Access adjustment over the table height (Fig.2)

K Depth adjustment handle (Fig.2)

L Unscrew the access base on the table (Fig.2)

M Base plate (Fig.2)

N Spindle lock of shaft (Fig.2)

O Fixing lever (Fig.2)

P Locking button (Fig.2)

Q Access to the blocking of the rotation axis (Fig.2)

R Locking lever (Fig.2)

S Copier bushing (Fig.18) (optional accessory)

EQUIPMENT

- Clip, 1/2” and 1/4”

- Fixed spanner, 22 mm

- Operating instructions

- Safety instructions

- Warranty

SAFETY INSTRUCTIONS

 See “Safety instructions” enclosed manual, supplied

together with this instruction manual.

 WARNING! The dust produced when milling asbestos

and/or silica stone materials is dangerous to health.

Follow the insurance company’s safety instructions

regarding the responsibility of employees.

 For your personal safety, always connect the machine

to a mains supply by a differential and thermal cut-out

switch, in accordance with regulations on low-voltage

wiring sitemaps.

 Do not perforate the machine casing, as this would

destroy the protective insulation (use adhesive labels).

 Always unplug the machine before doing any work on it.

 Always stop the machine by switching it off, not by

unplugging it.

 WARNING! Before each use, inspect the plug and

lead. Should they need replacing, have this done by an

official service centre. Only plug the machine in when it

is switched off.

 Always keep the lead out of the machine’s working

area.

 Only plug the machine in when it is switched off.

 Do not allow the machine to get wet, nor should it be

used in wet environments.

 When using the machine, always wear safety goggles,

gloves and non-slip footwear, and it is advisable to

wear ear protection.

 Check for correct piece fixing before commencing any

operation.

 Only milling heads with acceptable revolutions that are

at least the same as the maximum off-load revolutions

of the machine should be used.

 The milling head shaft diameter should match the

inside diameter of the tool-holder (locking clip).

 It should be ensured that the milling head is firmly held

in place before the machine is operated.

 The clip-carrier shaft support lever must only be oper-

ated when the machine is stopped.

 The milling head should only be brought into contact

with the work-piece after it has been switched on.

 The machine must be firmly held by the grips. Other-

wise the recoil produced could cause the machine to

work imprecisely or even dangerously.

 Hold the machine firmly in both hands and in a stable

position.

 During use, it should be ensured that the milling head

is in the centre of the copy bushing in order to prevent

any personal injury or damages to the work-piece.

 The milling machine must never be used on metal

objects, such as nails and screws.

 Hand must be kept clear of the milling machine while it

is operating.

 The cutting depth must never be adjusted with the

motor running. A mistake in this time could lead to

personal injury and/or damage to the milling head or

work-piece.

 The operator should remain alert and keep the milling

head apart from all objects during operation.

 When the milling operation has been completed,

locking lever should be operated so that the machine

returns to its upper starting position.

 The motor must be allowed to come to completely stop

before being put to one side between uses.

 The milling heads should be protected from impacts

and knocks.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti RF62 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Felisatti RF62 Manual

Product: