502514

Felisatti MTF250 Manual

4
Zoom out
Zoom in
Previous page
1/16
Next page
TECHNICAL DATA
Mitre saw MTF216/1100T MTF250/1500T
Absorbed power W 1100 1500
No-load speed / min 5000 4300
Cut at 90º/mitre (AxB Fig.4 a) mm 58x133 70x150
Cut at 45º/mitre (AxB Fig.4 b) mm 58x90 70x85
Cut at 90º/blade at 45º (AxB Fig.4 c) mm 35x1330 47x150
Cut on upper bench mm 31,5 45
Upper bench dimensions mm 224х358 264х385
Blade diameter mm 216 250
Blade hole diameter mm 20(30) 20(30)
Weight Kg 9,5 11
Overall dimensions (LxHxW) mm 427x277x531 460х450х300
Acoustic pressure, Lpa dBA 96 92
Sound power emitted, Lwa dBA 109 105
Vibration level (according to ISO 8041 and ISO 5348) m/sec2 2,5 3,9
Carefully observe the instructions in this manual, keep it in a safe
place at hand for any possible checks on the parts indicated.
If the tool is used with care and a normal maintenance is carried
out, it will have a long life.
GENERAL INFORMATION
DENTIFICATION (See indicated gures)
A Saw penetration adjustment screw (Fig.1a)
B Uptake connection nozzle (Fig.1,1a)
C Pushbutton switch (Fig.1)
D Safety hook release button (Fig.1)
E Switch lock button (Fig.1)
F Upper bench saw protector (Fig.3)
G Upper bench (Fig.1,1a)
H Upper bench blocking handles (Fig.2)
I Saw blade (Fig.1,2)
J Mobile guard (Fig.1)
K Turntable (Fig.1)
L Base (Fig.1,3)
M Fixed guide (Fig.1)
O Motor unit blocking lever (Fig.1)
P Position lock pin (Fig.1a)
Q Fixed saw protection, extractable (Fig.1а)
Q1 Protection button (Fig.1,1a)
R Scale index (Fig.1)
R1 Graduated scale for turning the motor unit (Fig.1)
R2 Graduated scale turntable (Fig.1)
S Guide xing buttery (Fig.1,2)
T Upper bench guide (Fig.1,3)
V Handles (Fig.3) (Optional accessory)
Y Bench xing bolt (Fig.1) (internal)
Z1 Adjustment bolt (Fig.1a)
Z2 AC cable (Fig.1)
Z3 Brush holder cover (Fig.1)
Z4 Clamp (Fig.5) (Optional accessory)
TECHNICAL CHARACTERISTICS
The robust and highly reliable structure makes these mitres
suitable for cutting wood, aluminium and steel in industrial
environments, while preserving their usual ease of handling and
without restricting their movement.
The MTF216/1100T and MTF250/1500T are tted with a wide
upper table that allows the mitre saw to be transformed into a
table saw to carry out cutting (up to a thickness of 45 millimetres).
The MTF216/1100T and MTF250/1500T are tted with two
working tables (upper and lower), and have been provided with a
switch to keep the circuit on while pressing, and a lock-on button
for free-hands operation when working on the upper bench.
The MTF216/1100T and MTF250/1500T are tted with a
new electronic device to prevent the machine from starting
unexpectedly after a break in the voltage supply. When this
happens, to restart you must oper-ate the switch to switch-off
and then to switch-on.
A single operator is needed to use the mitre saw, of which the
design and construction comply with stan-dards EN 61029-1 and
EN 60204-1.
SAFETY DEVICES
• Atrest,thebladeistotallycoveredbytwoprotec-tors,
one xed and one mobile, which are automati-cally opened by
the descent of the blade unit when cutting.
• On the upper bench, the blade is covered by one protection
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felisatti MTF250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti MTF250 in the language / languages: English, German, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info