502464

Felisatti DHF13 Manual

4
Zoom out
Zoom in
Previous page
1/32
Next page
4
Follow very carefully the instructions in this manual, save it
and keep close at hand, ready to carry out any inspection of
parts that may be necessary.
If the machine is used carefully and normal maintenance is
carried out, it will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the tool
is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See gures)
A Safety screw (Fig.2)
D Machine neck (Fig.2)
E Drill-hammer button (Fig.1)
F Cooling vents (Fig.1)
G Depth stop (Fig.1)
H Auxiliary grip (Fig.1)
I Turn direction lever (Fig.1)
J On-/off switch (Fig.1)
K Retainer button (Fig.1)
L Key-operated drill chuck (Fig.2)
M Drill chuck key (Fig.2)
O Label for reversing rotation R-L (Fig.1)
BRIEF DESCRIPTION
A mechanical percussion unit generates the power necessary
for hammer drilling in stone or concrete.
Use of the tool: These hammer drills can be used for hammer
drilling in stone, drilling in wood, metal as well as plastic,
and also for driving screws with driving bits installed in a key
chuck. Any other use not mentioned is not allowed.
Additional features of the hammer drill:
- Warning! This machine must not be used with hole
saws, core bits, diamond bits, etc, as these tend to jam easily
in the orice and can cause accidents.
- Change direction of rotation with switch lever I due to a
lockout mechanism, switching the lever is only possible if the
On/off switch J is not depressed.
TECHNICAL DATA
- Electronic control of spindle speed, innitely variable by
nger pressure on the On/off switch J.
- For continuous operation the On-/Off switch can be
locked in the “On” position by the button K.
- Adjustable auxiliary handle H, with integral depth gauge
G.
BEFORE USING THIS TOOL
WARNING! Before carrying out any work, check, for instance,
using a metal detector, that there are no electric wires or gas
or water pipes under the surfaces you wish to work on.
Make sure the mains voltage is correct: it must be the same
as that on the specication label. Machines with 230V can
also be connected to a 220V mains supply.
To turn the machine on, press the ON/OFF switch J and keep
it pressed down.
When the ON/OFF switch is released, the machine stops.
WARNING! Always disconnect the plug from the socket
before doing any work on the machine.
1. Drill chuck
These models feature key-operated drill chucks L.
Changing drill chucks (Fig.2)
Quick tting drill chuck
Insert it in the tool and tighten with drill chuck key M uniformly
on each of the three holes.
Remove the drill chuck by opening it all the way and
completely unscrewing screw A.
WARNING: Screw A has lefthand threads.
Hold the shaft at gap C with a wrench and turn the drill chuck
in the opposite direction of operation.
2. Changing the position of the auxiliary handle
1. Unscrew the auxiliary handle H in an anticlockwise
direction.
2. Turn the auxiliary handle H to the required position.
3. Screw the auxiliary handle H in place again.
3. Setting the depth gauge
Make sure before you start that drill-bit is inserted.
1. Hold the bit tip against the work surface. Push the depth
gauge G against the work surface, to the same depth as the
Hammer drill DHF13/580ER DHF13/650ER DHF13/750ER DHF13/780ER
Rated power W 580 600 750 750
No load speed /min 0-3000 0-2800 0-2900 0-2800
Work shaft thread UNF 1/2”x20 1/2”x20 1/2”x20 1/2”x20
Drill chuck capacity mm 1,5…13 1,5…13 1,5…13 1,5…13
Max. steel capacity mm 13 13 13 13
Max. wood capacity mm 20 30 30 30
Max. concrete capacity mm 12 13 13 16
N strikes in load /min. 45000 30000 45000 30000
Acoustic pressure dB(A) 96 93 96 95
Sound-power level dB(A) 107 104 107 106
Vibration acceleration m/s² 18,6 14,7 19,5 14,0
Weight according EPTA-
Procedure 01/2003
Kg. 1,9 2,1 2,3 2,2
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felisatti DHF13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti DHF13 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info