500411
3
Zoom out
Zoom in
Previous page
1/32
Next page
3
MACHINE-SPECIFIC SAFETY WARNINGS
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a “live”
wire may make exposed metal parts of the power tool “live”
and could give the operatoran electric shock.
Use appropriate detectors to determine if utility lines are
hidden in the work area or call the local utility company for
assistance.
Contact with electric lines can lead to re and electric shock.
Damaging a gas line can lead to explosion. Penetrating a
water line causes property damage or may cause an electric
shock.
Switch off the power tool immediately when the tool insert
jams. Be prepared forhigh reaction torque that can cause
kick-back. The tool insert jams when:
the power tool is subject to overload or— it becomes
wedged in the workpiece.
Hold the machine with a rm grip. High reaction torque can
briey occur while drivingin and loosening screws.
Secure the workpiece. A workpiece clamped with clamping
devices or in a vice is held more secure than by hand.
Keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can burn or
explode.
Always wait until the machine has come toa complete stop
before placing it down. The tool insert can jam and lead to
loss of control over the power tool.
Avoid unintentional switching on. Ensure the On/Off switch is
in the off position before inserting battery pack. Carrying the
power tool with your nger on the On/Off switch or inserting
the battery pack into power tools that have the switch on
invites accidents.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g.,also against continuous
sun irradiation and re. There is danger of explosion.
In case of damage and improper use of the battery, vapours
may be emitted. Provide for fresh air and seek medical help
in case of complaints. The vapours can irritate the respiratory
system.
When the battery is defective, liquid can escape and come
into contact with adjacent components. Check any parts
concerned. Clean such parts or replace them, if required
Use the battery only in conjunction with your FELISATTI
power tool. This measure alone protects the battery against
dangerous overload.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felisatti DCHF 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti DCHF 18 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info