502483

Felisatti AF180 Manual

5
Zoom out
Zoom in
Previous page
1/45
Next page
5
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at hand to
use when carrying out maintenance on the indicated parts.
If the tool is used with care and normal maintenance is carried
out, it will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the tool
is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See gures)
A Push button (Fig.1)
B Trigger switch (Fig.1)
C Spindle blocking button (Fig.1 and Fig.3)
D Auxiliary handle (Fig. 1)
E Guard ange (Fig.2)
F Bolt (Fig. 2)
G Pin spanner (Fig.3)
H Clamping nut (Fig.3)
I Support plate (Fig.3)
J Spindle (shaft) (Fig.3)
K Rear handle turning button (Fig.1)
L Rear handle switch (Fig.1)
EQUIPMENT
- 1 disc guard
- 1 auxiliary handle.
- 1 pin spanner
- 1 support plate and 1 clamping nut
- Operating instructions
- Safety instructions
- Warranty
BRIEF DESCRIPTION
This angle grinder has been designed for cutting, deburring
and cutting metals and stone without the use of water.
TECHNICAL DATA
BEFORE USING THIS TOOL
Before using the tool, make sure the mains voltage is correct:
it must be the same as that on the specication label.
Machines with 230V can also be connected to a 220-V mains
supply.
Before plugging in the tool, always make sure the control
switch A and the trigger B work properly and return to the
“OFF” position when released.
FITTING SAFETY DEVICES
CAUTION! Always unplug the machine before carrying out
work on it. Always work with the guard in place and wear
protective goggles.
1.1. Fitting the disc guard
Insert the guard ange E in the slot in the collar of the machine
plate and turn it to the desired working position.
If the guard does not t in the collar, loosen the bolt F.
CAUTION! When tting, the closed part of the disc guard
should always point towards the user.
1.2. Fitting the auxiliary handle
Use of the auxiliary handle is obligatory in order to ensure
greater control and safety when handling the tool.
The auxiliary handle D must be screwed on to the right or left
side, or on top, depending on the type of work to be carried
out.
Auxiliary anti-vibration handle
The auxiliary handle D is made from a special material
that absorbs the vibrations, which allows you to work in a
comfortable and safe manner.
There is no modication in the auxiliary handle.
Do not use the auxiliary handle if it is damaged.
FITTING THE ACCESSORIES (DISCS AND WHEELS)
CAUTION! For safety reasons, the machine should always be
unplugged from the mains before changing the disc or wheel.
Always work with the guard on and wear safety goggles.
Use deburring and cutting discs with bre-reinforced
synthetic binders, for a max. peripheral speed of 80 m/s and
cup wheels with synthetic binder for 45 m/s.
Protect discs and wheels from knocks and blows.
Angle grinder AF180/1800S AF230/2100S AF230/2300S AF230/2600S
Input power W 1800 2100 2300 2600
Output power W 1170 1370 1500 1700
No-load speed /min 8000 6500 6000 6000
Max. disc diameter mm 180 230
Spindle thread ISO M14
Acoustic pressure dB(A) 95 95 96 95
Sound-power level dB(A) 108 106 109 106
Vibration acceleration m/s² 4,7 7,1 4,9 7,1
Approx. weight (w/o
accessories) according
E P T A P r o c e d u r e
01/2003
Kg. 3.8 5.4 5.4 6.7
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felisatti AF180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti AF180 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info